Jump to content
SAU Community

Recommended Posts

genuine xenon kit

HID_BOX-3.jpg

XENON HID provides more than twice the amount of light of a halogen bulb, it does not have a filament. Instead the light is created by an electrical discharge between two electrodes in an air tight tiny quartz capsule filled with xenon gas, mercury and metal halide salts. This improves durability as road vibrations can cause damage to coil lighting technologies. These light sources also produce a blue-white light that is safer because it is closer to natural daylight. The color temperature is approximately 5000-13000 K compared to 2300-3000 K for halogen. The increased light output from a 35 watt XENON HID lamp is approximately 200-300% more light output than a 55 watt halogen bulb. The XENON HID system will also draw less power from your vehicles electrical system.

we will donate 5% form each sale to SAU

prices : 5000k kit RRP $879 SAU Price $709

8000k kit RRP $899 SAU Price $749

(note :H4 Hi/Lo extra $25)

fitting sizesH1, H3, H4 Lo, H4 Hi/Lo, H7,9005, 9006

if you have any queries please contact

Martin

IBS Electronics

93a Liverpool RD

Summer hill NSW 2130

phone (02)9798-7919

fax (02)9797-9471

www.ibselectronics.com.au

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/46390-donation-sale-hid-kits/
Share on other sites

  • 2 weeks later...

the globes igniter and ballast are made in germany

wiring hrness and pakaging in taiwan

8000k is uv when using florescent light scale

this is light scale for gas discharge

i use the 8000k in my car

anyone is more than welcome to inspect the quality of the product and light output

just send me an email and we can meet anywhere in sydney

or you can come to my store and ill show you how it works

  • 3 weeks later...

It might sound like a dumb thing to say but I thought that to go to HID you'd need to buy new lamp assembly's that have a higher heat tolerance due to the high heat output of the Xenon discharge lamp?

Just a thought... plz correct me if I'm wrong.

Dan

xenon is actually lower heat output... these kits are manafactured to replace the bulb type in your standard headlight assembly.

Simply remove your halogen bulb and install this kit and you have converted to HID...

Its been around for some time now.

I've got a set of xenons in my r33 gts-t and they're fine. Had them for a few months now and no problems with heat/melting etc.

These hids are not the same as what I have. I don't know about this particular brand.

  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...