Jump to content
SAU Community

Recommended Posts

Hi Peeps,

Ive changed alot of Cambelts in my time, but while Ive had my R32 for over 10 years Id never changed the belt as its done less than 20,000km in that 10 years!. Obviously It needed to be done (I was thinking it would be as hard a nails...) and I didnt want it failing on a trip to Townsville, so I looked up a few "how to guides" in the forums to see if theer are any traps for the RB, and used this StageA guide.

http://www.sau.com.au/forums/topic/73824-adj-camshaft-pulley-new-cam-belt/

which alerted me to the relevant timing marks.

What I noticed in all the guides I found on SAU is that they all remove the old belt completely before putting the new one on, which makes it alot harder than it need be, and introduces another potential timing mistake.

The trick is to cut the old belt in Half along its length.

First prise the old belt half off, and slice it along nits length. Once you start it it will tear along the "nylon belts" that give it strength.

CBelt3_zpsdfbcrwrq.jpg

Then Push it right ot the back of the cam pulleys

CBelt5_zpsxi99xp2w.jpg

Put the new belt on next to it.

CBelt6_zpshydj8lcm.jpg

Then cut the remainder of the old belt and remove it.

CBelt8_zpss8vxpngw.jpg

And push the new belt into position

CBelt1_zpsq9p2w95g.jpg

I didnt change my waterpump, but its normally easy enough to do that "behind the half belt" when you are at the beginning of the process.

Finally I changed the Idler/tensioner by cable tying the middle of the belt together so it didnt jump teeth while I undid and replaced the old ones.

Hope this little trick is useful for someone.

Cheers

Brett

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/463988-cam-belt-change-shortcutquick-cheat/
Share on other sites

Thanks to the OH&S rep for pointing me out as "half a job" Harry,

He also forgot to mention I didnt document the date and time of the last change, I didnt change the water pump (something I may actually regret!) and I was running a risk of a broken belt for being negligent for a long period,

So for the 2 or 3 readers who are not perfect I apologise. Seals that harden do leak, and when it happens fix them immediately, else the oil leak will "f" up the belt quickly and have the nasty consequence of dropping oil on your mate's driveways.

I agree if I had a 11.79 second car that gets a proper throttle application on occassion the seals will suffer and need to be fixed on every belt. But for the rest of us with 130HP driven at about 30 HP most of the time the seals do not need replacing very often.

But i cede to to your experience as I do not have such an awesome drag machine in my garage.

An interesting approach, one that I would never have thought of, congrats to you for thinking outside the square.

I don't touch the seals unless they show signs of weeping.

Have seen too many replacement seals weep due to difficulty linishing old wear marks from the sealing surface whilst in-situ.

Saw the zip tie method used during el-cheapo cylinder head removal. My luck would have something drop down there and ruin the show.

Relax mate. It's a good idea, just pointing out that if you're performing a major 100km service, then do everything.

The previous owner of the car I just bought took shortcuts, and now I'm having to redo everything. Though if you've done all that, then what you've posted is a great tip.

  • Like 2

Well, pulling off the balancer on an rb26 is a pain, and the torque requires to do them up is huge. It's not something that I would want to do more than required.

It's a nifty idea nevertheless.

:-) My response was a little "sharper" than intended,so a heart felt beer will be offered at first opportunity.

And yes.. I will be kinda cranky if they leak now.... ;-), but in the interests of full disclosure Ill let you all know!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...