Jump to content
SAU Community

Recommended Posts

Hi,

Looking at buying an R33 and there are a few nice examples around.. Trying to gauge on what fuel economy will be.. Looking at an R33 2 door, has a bigger turbo, Adaptronic ECU, 750cc injectors and a few other things..

Its my understanding that 750cc is quite high on these motors for 300HP... Is it going to be using 20L per 100km combined? That might be a deal breaker and i may have to look for a more stock example if the fuel usage is going to be fairly high.

Thanks,

Glen

(Post your mods and economy)

Thanks. Was talking to a tuner at a Jap workshop in WA and was told to expect around 20L but.. that might be with heavier right foot perhaps? I'd be pretty happy with 15L but, i wouldnt want to buy this car in particular, only to have to get smaller injectors and re-tune to try to get somewhat-sane fuel economy haha

Just for reference, I make a fair whack more power than the R33 you're looking at and happily will do 12L per 100km or less on the highway using road tyres. With semis it chews heaps of fuel.

Thanks everyone and Ben from the internet! WIll let her know that Ben from the internet said that all will be well :D

In reference to the 250km to the full tank daily driven, what size is the fuel tank? Know roughly how much you used? That's a little scary but.. The plan is to sell our $30k patrol for the or a $10k skyline so.. Fuel usage a little high might not be the end of the world. We do have a V6 Accord that will happily run off of 10L per 100 around town and 7L per 100 on the highway so, that can be the "fuel efficient" car if need be!

When the light comes on, takes about 49~52L to fill back up to the top.

I had a CG9? (1998) V6 Accord, it drank more than my shit box R33 and made like 1/4 of the power lol

Wow thats crazy! They must have improved the V6 motor perhaps? I dont know a lot about the Honda timeline and their models, only ours. Its a 2008 3.5L V6. 202KW with paddleshift and it shuts off 3 of the cylinders when youre not using much power to try save fuel. Seems pretty good on fuel and it is actually pretty quick for a RWD but.. I miss my turbo's and man oh man, the 3L 3 tonne patrol is slow!

Come on Johnny, if the 33 hears you say that it'll blow up!

Well it's got a new turbo and a track day coming up on the 30th May, I have a feeling the old 360 xxx km Edward Lee's Special Edition motor might not like being thrashed off its tits making more power & torque.

Im sorry... did you just say the motor has 360,000km on it? :D Does that mean im worrying about nothing when im looking at 150 - 170,000km models?

Sure does, and I thrash it harder than I thrash a rental car... clock says 160xxx now... but because it came from Edward Lees Import, I've added a precautionary 200 000 km to it.

I'm basing that off the sloppy tie rods, worn out bushes (subframe, diff, power steering, bushes on all arms, caster, etc.) all of which I've replaced with Hardrace and/or Superpro shit.

Also, when I bought the car off the original owner who bought it off Edward Lees it supposedly had a major service done... when I pulled off the timing cover the belt looked like it had been there for a few hundred thousand kms lol...

At the end of the day, zero fuuarks were given.. paid $4.5k for a stock R33 S2, albeit had wank Autosalon wheels on it and a bunch of rubbish parts on it which were removed and disposed of or sold.

Ah cool... How often are these cars wound back? Got my eye on a few online.. One of which is the one with the 750cc injectors. Another, is one that had a motor failure pretty early on and had a motor supplied and installed by a Perth importer. Likely for the KM's on that motor to have been given to the customer incorrectly when he bought the motor?

I'll definitely have my eyes open when looking thats for sure... Dont want to end up with a heap of crap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...