Jump to content
SAU Community

[question] R32 Gtr With 18x10 +15

deongster
 Share

Recommended Posts

GH05T Grand Master

GH05T

Posted
Posted

wheels,

mine runs 18x9.75+20 and it sits just in the guards. the 265/35s sit square. doe snot rub but I don't run heaps low and my guards are not lipped and I still have the liners in, check my thread for pics of the fitment.

the extra .25 width and the extra 5mm offset will simply push it a bit further out the guards. its on the limit though, u will need to lip the guards and maby more depending on how low your gonna run the car.

  • Like 1
deongster Mentor

deongster

Posted
  • Author
Posted

wheels,

mine runs 18x9.75+20 and it sits just in the guards. the 265/35s sit square. doe snot rub but I don't run heaps low and my guards are not lipped and I still have the liners in, check my thread for pics of the fitment.

the extra .25 width and the extra 5mm offset will simply push it a bit further out the guards. its on the limit though, u will need to lip the guards and maby more depending on how low your gonna run the car.

Thanks mate. The guards are currently rolled. So that's good news.

I read a few people gone with 18x10.5 +18 and it fits flush.

So I thought I'd be smart and drop half an inch to 10 and drop +3 off set to +15

Thought it would fit fine... Oh well... Hope they fit fine. I guess 295 is out the window. Maybe max 275.

GH05T Grand Master

GH05T

Posted
Posted (edited)

295 is allot of meat, especially on the fronts. depending on height and camber it may fit, but it would be fat and tight if it did. probably worth pumping the guards for it.265 would be nice. 275 would be fit square to the wheels.

Edited by GH05T
  • Like 1
deongster Mentor

deongster

Posted
  • Author
Posted

Yup hahah cos of the tyre choice. Only that few sizes. I guess will stick to 265 now. I'm running those now. Just want better rubber like A050 or z221.

I have a feeling it may fit. I want to try.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

If you recall my car, it has 18x10+20 with 275/35 RS-3 tyres. Front camber is about -2.5° rear camber -1.5°.

Front still rubs on compression turns, but I have a bit of extra castor (around 5.5°) and some toe in. Height plays a noticeable part as well (my car now sits around the same height as yours in your sig), I think you'll be fine with some negative camber and 285/30 tyres (what I want to run next).

If you set the cambers to 0, the wheels will just poke outside the guards lol.

deongster Mentor

deongster

Posted
  • Author
Posted

I have quite a massive camber at this point. Ikeya formula arms front and rear. I don't know the amount though. But my current wheels are like completely in the arches.

Height is the same as before. Hmmm want to try 295 A050. I mean I don't drive the car much anyways.

Mine definitely not 0 camber.

  • 2 weeks later...
dontfeelcold Experienced

dontfeelcold

Posted
Posted

265/40/18 Rims are 18x9.5, cant remember offset, with spacers I think its +20.

front: massaged the back of the wheel well, folded the sheet metal join at the top and I had to make custom guard liners. Rolled the lips and pulled the guards out alot. There is about a 5mm gap between the tyre and the non pivoting (steel) part of the upright.

rear: had to roll the lips and pulled the guards out slightly. I even had to push in the bulge on the inside at the to the top of the rear wheel arch.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
×
×
  • Create New...