Jump to content
SAU Community

Recommended Posts

16 hours ago, Duncan said:

I'm very happy with my similar setup on the race car, I've run up to 1hr enduro races on them and targas etc with no issues. These are a bargain at the posted price even if they need a reco

Pads easy to find? Good ones? or need some searching around?

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

 

  • Like 1
I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd
 


Thanks Duncan. Will definitely have a think!
2 hours ago, BunsenBurna said:

Minko the forum tells me you can't receive messages!

Have deleted some messages - hopefully works now?

 

No issues with brake bias, car was run on street, circuit, street sprints by myself and previous owner and setup was perfect.  

 

On 11/01/2017 at 8:10 PM, Duncan said:

I had less options than when I was running the 33/34 Brembos, for instance I could not get my preferred hawk ht-60, however there were still plenty of good brands to choose from; Winmax, Pagid, SBS are ones I've used in them. Its a pretty common porsche caliper not something wierd

Duncan sorry to bombard you but since you're the expert on this setup, have you run this ok with ABS?

Also with the dog bones/adapters, any chance they would suit R34 GTT or would you need to re-drill or re-tap them or the uprights? From memory R32/33 might be 12mm bolts whereas 34 is 14mm (or vice versa)?

c'mon guys this is a for sale thread not a brakes discussion. I wanted to add some information which might assist the sale but seriously, at $800 this is an awesome deal.

I still run ABS in the race car, I have no balance problems or ABS issues although I have chosen to run different pads front and rear.  The seller would have to confirm details about the bracket but the one on mine is an excellent piece of 5mm steel angle. Obviously I don't know bolt size on this sale but if it is larger than your hub (ie M14 into M12 hub) you could drill out the hub easily, and if the bolt is smaller than the hub size (ie M12 into M14 hub) then you could do nothing (because it will be fine once torqued) or use 12-14mm sleeves if you are concerned.

  • Like 1
At least one offer has been made pursuant to the recent discussion so good result I'd say...
Seal kit anyone?!

See page one of this thread for the seal kit :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...