Jump to content
SAU Community

Recommended Posts

I have a r33gtst that is booked for a tune tomorrow.

I have all the supporting mods like r34 highflow, power fc etc.

My goal is about 240 atw

I bought a 1000cc topfeed xspurt injector kit from scottynm35 and even though i assumed they were too big, i was told that they are a much more modern design, can flow well at all power levels and therefore would be suitable for my application.

however the tuner tells me they are way too big and will not be suitable for my goals, he told me he can safely run the stock injectors by upping the fuel pressure with my aftermarket fuel reg.

What do you guys think?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/466010-1000cc-injector-question/
Share on other sites

Strictly speaking, they are too large.  You'll only need ~1ms pulse width to idle on petrol and you therefore have very little ability to tune the idle mixtures.  But it will work.  Idle may be slightly fluffy, or it could be perfect.

On E85 it would be easier.

But what you were told by others than your tuner is true.  They will work, and they will allow you to go E85 later very easily.

I shudder in horror at the thought of jacking up the fuel pressure to achieve 240 rwkW on factory injectors.

  • Like 1

Run the 1000ccs, technology has already advanced so far over the last 10 years, they'll be fine
Upping fuel pressure with stock injectors will only lift the headroom by so much over the 200rwkw, works fine but stresses your fuel pump and affects injector lag time anyway

My main concern is, will the car run perfectly on the 1000cc injectors? i dont want it to not idle well or run just "fine".
I will speak to the tuner later today about it, but its looking like i will just cancel and wait a bit longer.
it definitely did not seem right to just up the fuel pressure on the stock injectors. The thing is the tuner is very reputable among the skyline and silvia community and i have heard nothing but good things about him.

If your tuner is smart, and say in the event those milled X-Spurts (I don't have experience tuning them) don't idle well on 98RON, you can drop the fuel pressure to say 2.5bar with the vac hose off on idle (then connect it back once you've finished setting the FPR).

This means now you can run higher pulsewidths and have the correct amount of fuel injected to maintain the idle and AFR of your choosing and you have plenty of headroom for the future.

I've got 1000cc IDs....no issues on idle.  I'm pretty sure there about about 1,000 others on here who'll tell you the same.

Keep the IDs, get a new tuner.

1 hour ago, vxsr33 said:

Called up chequered tuning and they said it would be no problem, so going for a tune with them. :-)

i was told the new injectors dont have filters though. Does anyone know where i can get some? (Dont know much about injectors)

Very good plan :)

 

Trent is good, he will sort it out. Seen several maps most of which are very good.

Seen big tuning shops in Sydney with tunes that could be done by a 2 year old holding the number 8 key. 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...