Jump to content
SAU Community

Recommended Posts

13 hours ago, GT-Rr32 said:

Motor air filter. 

Yes I did. 

OK. Air filters a part in common with other Nissans, so not an issue. New cabin filter is a must if you haven't already swapped it out (Japan is very smoggy in parts).

I had issues with Nagoya for my 2013 model. I hope they were better for your's. 

18 minutes ago, Stuart McK said:

OK. Air filters a part in common with other Nissans, so not an issue. New cabin filter is a must if you haven't already swapped it out (Japan is very smoggy in parts).

I had issues with Nagoya for my 2013 model. I hope they were better for your's. 

Yeah we did have issues as well. 

 Typical friendly and do anything for you when buying it but after sales service was crap. Took a mouth after we picked it up to get the English  conversion done and which was meant to take 2 days ended up taking a week. 

Alex is nice to deal with but his brother is an arrogant pig.

Does the 370z air filter intake kit fit the cross over ?

 

cheers 

  • 1 month later...
On 08/03/2017 at 7:55 AM, GT-Rr32 said:

Yeah we did have issues as well. 

 Typical friendly and do anything for you when buying it but after sales service was crap. Took a mouth after we picked it up to get the English  conversion done and which was meant to take 2 days ended up taking a week. 

Alex is nice to deal with but his brother is an arrogant pig.

Does the 370z air filter intake kit fit the cross over ?

 

cheers 

Hi. Sorry - haven't been checking this forum for a while.

I agree that the customer once a deal is done is no longer a priority with them. Otherwise, I only dealt with Alex and his off-sider, Liam. Sounds like it's good I never met his brother.

Re 370Z air intake kit: which? If you're talking after-market straight-through pipe with pod or similar, I can't say. If you're talking genuine Nissan filters using the standard intake fitting, you just need to ensure they're suitable for the J50 engine.

Edited by Stuart McK
  • 3 weeks later...

Hi Peeps

I have a 370GT Crossover awd here in Auckland.

Has anyone ever managed to work out how to turn-off the annoying SCHOOL NEARBY pop-up warnings?

It would be great to get rid of them, especially because they go off when I'm on the motorway!

Cheers

On 2017-5-2 at 0:59 PM, Tubes said:

Hi Peeps

I have a 370GT Crossover awd here in Auckland.

Has anyone ever managed to work out how to turn-off the annoying SCHOOL NEARBY pop-up warnings?

It would be great to get rid of them, especially because they go off when I'm on the motorway!

Cheers

Hi Dave. I think Win4ever mentioned he had the issue too. I don't get those warnings in mine (I've a 2013 model), so I've got to assume there is an option in the navigation menu to disable proximity warnings such as that. Not much help I know.

Otherwise, the car is the Infiniti EX37 in the U.S. You could try downloading that car manual for your year and see if that's mentioned. Available numerous locations if you Google.

Edited by Stuart McK
  • 3 months later...

Hi guys. Just a quick question. 

Need to replace the brake pads on the crossover  

Which ones fit, 370z ? Not sure which model runs the same. 

Many help would be apericated. 

Thanks 

  • 1 month later...
On 04/09/2017 at 9:36 AM, GT-Rr32 said:

Hi guys. Just a quick question. 

Need to replace the brake pads on the crossover  

Which ones fit, 370z ? Not sure which model runs the same. 

Many help would be apericated. 

Thanks 

Hi. Sorry I missed this, but I note you found your answer in another thread. I've saved that link too JIC... ;-)

1 hour ago, GT-Rr32 said:

No I never found an answer. 

I did find pads but no listing for rotors any where. I have given the sizes to DBA and waiting on a reply. 

Cheers 

Did you look here?

Page for J50 Skyline Crossover

6 hours ago, GT-Rr32 said:

How did you find that ? 

I contacted DBA direct and they said they have no listing for that car. 

Well thanks a lot ! 

DBA said the same thing to me when I asked about the 330mm brakes for my V36... Luckily Brakes Direct had been hassling them for years about that size, and made DBA aware that they were an Infiniti part too... This added the US to the potential markets and it all made financial sense for DBA. That said, I ordered them in January (on a promise that they would eventually be made) and received them in August...

I think that the issue is DBA retail, do not know that DBA future planning or R&D are actually working on... Only what is available now...

  • 4 weeks later...

2014 gt370 P four.

 

love it

 

cant get the console unit translated to English.  Apparently the new model has a different unit. Not a big deal as Bluetooth is all I need.

 

however I decided to try a mirror cast box.  Need power (bat and accessory) in the centre glove box thingy.  Anyone know what this outlet is?  I'm sure I've seen it talked abiutnjere before but can't find the thread now

 

 

IMG_4381.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...