Roy Posted August 3, 2016 Share Posted August 3, 2016 Near new conditon stainless steel exhaust. Has been sitting on the shelf collecting dust for a while. Font pipes are 65mm into 80mm exhaust. Was going to keep this for rego purposes before doing custom but bugger it...will worry about a street exhaust if I run into noise issues with my custom twin system. $450 from the MX front pipes. Sorry about the pics showing dust and crud. If i need to I will give them a wipe down so that you can see the excellent, low km condition Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/ Share on other sites More sharing options...
Roy Posted August 5, 2016 Author Share Posted August 5, 2016 Well...i needed to clean them up to post them so gave them a quick hose. As can be seen they are in good nic...if you are really anal a light polish will have them looking like new Happy to post Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7764036 Share on other sites More sharing options...
Roy Posted August 8, 2016 Author Share Posted August 8, 2016 Exhaust is sold. Front pipe still for sale Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7764730 Share on other sites More sharing options...
Roy Posted September 5, 2016 Author Share Posted September 5, 2016 Front pipe still for sale $200 plus delivery Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7772789 Share on other sites More sharing options...
niZmO_Man Posted September 6, 2016 Share Posted September 6, 2016 Location? Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7773112 Share on other sites More sharing options...
Roy Posted September 10, 2016 Author Share Posted September 10, 2016 Melbourne CBD...can post anywhere Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7774277 Share on other sites More sharing options...
Roy Posted November 4, 2016 Author Share Posted November 4, 2016 Alcon 6 Pot Caliper and Rotors I have held on to these calipers and rotors for years with a plan of putting them on whatever I bought next, an R31 coupe or R32 GTR. But still dont have the space for a 4th car and reality has set in that I have to continue to part with what I think is cool stuff I have collected over the years for my cars. I dont intend to run 18s on my my GTSt and it has a good 4 pot Stoptech 343mm setup for 17s and my Cossie already has 378mm 6 pot APs so these have no place to go except a 4th car which isn't happening anytime soon.:( So, these are similar to the common Alcon Mono6 that many people run on 365x32mm rotor. However these were an Alcon Jaguar caliper that ran 410x35mm rotors on what I believe was their GT4 cars run by Prodrive. So simply put the std Mono6 can only take a 32mm rotor and doesnt have the curvature to go much over 365mm. These take a 35mm rotor and can take any common R35 GTR rotor diameter. These calipers are used, but like new. They did one event and the car ended up through the kitty litter so the caliper got a few nics and bumps as rocks bounced around between rim and brakes. They have been freshly coated in silver by HPC and never ran on a car by me. I slapped a vinyl Alcon sticker on the caliper for the pics, but my intetion was to stencil NISSAN on the caliper, but thankfully havent done it to date and guess if I had doen so it would have limited their appeal for this sale. SO you are free to stick the Alcon stickers on them, paint Alcon on them or paint whatever you like But has evidenced by the condition of the pistons you can see they are as new. Rather than the 410mm Jag rotors I have a set of R35 GTR rotors measuring 380x35mm. They re freshly machined and still in spec but wont have another machine in them The calipers and rotors come with new DS2500 pads, but no brake lines or mounts. Asking $2200 for them for calipers, pads and rotors. 1 Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7789265 Share on other sites More sharing options...
Roy Posted November 8, 2016 Author Share Posted November 8, 2016 $180 for the stainless Trust front pipe? Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7790139 Share on other sites More sharing options...
Roy Posted November 19, 2016 Author Share Posted November 19, 2016 Will take $2,000 for the Alcons and rotors ex HRT Momo seat EX Holden Racing Team (HRT) seat out of Jason Bright's 2002 car for ride days. I ran this seat in my track car for a few years and one weekend at Phillip Island Jason Bright was good enough to sign the seat for me The seat is a Carbon Kevlar Momo race seat. Back in the day it was a $4,500 seat and about the best strength-weight proposituon you could buy. The left hand side head restraint was trimmed to suit the HRT roll cage ( see pics) The past number of years i have kept the seat for my simulator setup but just don't have the space for it anymore so parting with my part of HRT history Also have rear std R33 GTR upper and lower suspension arms for $50 each (traction, camber and LCA) Also have R32 rear end bits for $50 each, inc LCA and hubs Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7792736 Share on other sites More sharing options...
Roy Posted November 19, 2016 Author Share Posted November 19, 2016 Also found these in the bottom of a box and forgot I had them. I run 343mm rotors rather than the 340mm these were intended for when used with the Biot 340 rotor and Brembo F40/F50 caliper. About the biggest rotor / caliper arrangement you can get under most 17" wheels ( I run TE37s with no clearance problems) There are several cheap Brembo F40/F50 setups for sale on SAU at the moment so will help you get a good setup for reasonable dollars Off this kit http://www.biot.co.jp/products/biot/caliper/f50-4pot/ http://www.biot.co.jp/products/biot/caliper/f50-4pot/brembo-f50-4pot-340/ http://www.biot.co.jp/products/biot/rotor/front/ Asking $200 delivered for them Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7792737 Share on other sites More sharing options...
KLR32 Posted November 26, 2016 Share Posted November 26, 2016 Front pipes still for sale? Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7794040 Share on other sites More sharing options...
Roy Posted November 28, 2016 Author Share Posted November 28, 2016 Yep, They are sitting on the bench next to the car Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7794475 Share on other sites More sharing options...
ant34 Posted December 14, 2016 Share Posted December 14, 2016 Hi are the Alcon brakes still for sale ? Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7798375 Share on other sites More sharing options...
Roy Posted December 14, 2016 Author Share Posted December 14, 2016 Yep Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7798400 Share on other sites More sharing options...
Roy Posted April 2, 2017 Author Share Posted April 2, 2017 Bumpage Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7821566 Share on other sites More sharing options...
Roy Posted May 20, 2017 Author Share Posted May 20, 2017 Still got the Alcons and seat Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7830454 Share on other sites More sharing options...
JimmyRickard Posted June 3, 2017 Share Posted June 3, 2017 How much for the seat? Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7832830 Share on other sites More sharing options...
Roy Posted June 3, 2017 Author Share Posted June 3, 2017 $250 pick up Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7832862 Share on other sites More sharing options...
Roy Posted July 1, 2017 Author Share Posted July 1, 2017 As per above....BUMPY: Will take $2,000 for the Alcons and rotors rotors. Also have rear std R33 GTR upper and lower suspension arms for $50 each (traction, camber and LCA) Also have R32 rear end bits for $50 each, inc LCA and hubs ex HRT Momo seat EX Holden Racing Team (HRT) seat out of Jason Bright's 2002 car for ride days. I ran this seat in my track car for a few years and one weekend at Phillip Island Jason Bright was good enough to sign the seat for me The seat is a Carbon Kevlar Momo race seat. Back in the day it was a $4,500 seat and about the best strength-weight proposituon you could buy. The left hand side head restraint was trimmed to suit the HRT roll cage ( see pics) The past number of years i have kept the seat for my simulator setup but just don't have the space for it anymore so parting with my part of HRT history Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7838048 Share on other sites More sharing options...
Roy Posted October 8, 2017 Author Share Posted October 8, 2017 Bump Link to comment https://www.sau.com.au/forums/topic/466116-alcon-brakes-bnr32-trust-mx-front-pipe-biot-f40-susp-bits-momo-seat/#findComment-7853453 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now