Jump to content
SAU Community

Newbie drag racer...what am I doing wrong???

JTCC

By JTCC,
in Motorsport Discussion & Builds

 Share

Recommended Posts

JTCC Community Regular

JTCC

Posted
Posted

Ok got the car to the track for the first time for harmless fun. I read on the subject before hand so I could get an idea on launching etc. Practiced on the street a few times also. I will give a run down of my setup. Full midori 3 to 3.5 inch exhaust (stock turbo dumps for now), Omori inlet pipes, Nismo intercooler/piping, Nismo twin disc, HKS coilovers, Advan AD08R 265/35/18 33 psi, 12-13 psi on stock turbos, stock air box, OEM ECU....unopened motor. Basically stock with bolt ons. What I did was launch the car from 7k. Kept getting wheel hop and 2.0-2.2 60 foot times. Never broke 2.0. Was trapping  100-104 mph all night. My best time was a 13.61 with a passenger! Other than that it was consistent 13.9. Something doesn't seem right to me. I even tried to launch at 6k and 5k but it did no help. 5k was to low as the car would bog down. Could it be the wheel tire setup? Should I throw the stockers on with a decent tire? I also have some te37 17x9 +22 if those would be a better choice. I could have put the coils to full soft in the rear, that may help a smidge. I was also shifting at 7k. Seemed like the finish line was at the very top of 3rd gear 7-7.5k rpm. What am I doing wrong here. Thanks!!!

JTCC Community Regular

JTCC

Posted
  • Author
Posted

haha yes, I definitely agree with you. But it just seems like I should be getting better numbers than that regardless? The wheel hop is what has me concerned because it was rather aggressive. Not sure on how to go about fixing that. Only does it on the track because of prepped surface I'm guessing. I honestly think the car may be faster on the street because when I launch on regular road is just gives a little tire screech and goes like normal.

WantGTR Mentor

WantGTR

Posted
Posted

With that mph you should be doing low 13s. Work on your launch. Coming out of the hole will make or break your run. If your clutch is decent your 60s should be comfortably less than 1.9. 

Eventually, if you want to go fast youll need more power.

JTCC Community Regular

JTCC

Posted
  • Author
Posted (edited)

Yea, I was hoping for a very best of a 12.9. But I was getting 13.9 lol. Very disappointed. I knew it had to be because of the wheel hop on the launch. Sounded so terrible. I still beat every car I raced though lol. Few mustangs and a camaro. So I didn't look like a total scrub. I think I will try out my te37 with crappy nankang ultra sport nsII 255/40/17 tires. Maybe those will have a little more give on the launch. Also, I guess 26 year old worn out bushings would allow for wheel hop to happen easier also. Allowing to much movement. Guess I know what I'll be buying next lol.

Edited by JTCC
  • 2 weeks later...
Adz2332 Grand Master

Adz2332

Posted
Posted

i to am having trouble with my launches. all be it i have 390kws and slicks. 

my 60 foot times are around the 2.0 also. i just continually bog down no matter where i launch from.

 

Any ideas?

r32-25t Grand Master

r32-25t

Posted
Posted

We usually launch at 7 and when you come of the clutch get the accelerator to the floor as fast a possible

Or you could try coming of the clutch a little slower to help stop it from bogging (go from a side step to bringing it out really quickly)

or launch control to get it onto boost before you're off the line

**I take no responsibility if something breaks**

 

Adz2332 Grand Master

Adz2332

Posted
Posted

Or you could try coming of the clutch a little slower to help stop it from bogging (go from a side step to bringing it out really quickly)

thats what im thinking next. havent had a lot of test time as somethings gone wrong ....

admS15 Grand Master

admS15

Posted
Posted
i to am having trouble with my launches. all be it i have 390kws and slicks. 

my 60 foot times are around the 2.0 also. i just continually bog down no matter where i launch from.

 

Any ideas?


Is this gtr or gtst? I would either use more clutch and bring on boost before totally jumping off it or set up a 2 step. In my gtst with 312kw I've been able to get better launches with more clutch rather than the 2 step. I've only got a small high flow turbo though, so I can bring it onto boost off the line quite easily with good clutch work. Awd is another kettle of fish altogether but I don't see why the same method wouldn't work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...