Jump to content
SAU Community

R34 GTT Front Crank Worn - Some Advice

BlazenR34

By BlazenR34,
in Queensland

 Share

Recommended Posts

BlazenR34 Explorer

BlazenR34

Posted
Posted

R34 GTT Front Crank Worn - Some Advice

Hi everyone! I'm looking for some options and advice to a serious problem that occurred to me yesterday.

As you can see from the images below the front crank has been totally worn affecting the Harmonic Balancer and everything else etc effectively make the motor and car dead atm. My car has been extremely well looked after as with everything i own its just one of those devastating things that has happened as the mechanic has said and I still can't believe it. Car has done 130K.

I'm just feeling out the options as its essentially an engine rebuild and i'm doing career stuff overseas etc this is going to be extremely costly. Should i repair/rebuild/wield/sell/hold off any ideas and opinions are welcome.

Based on the Gold Coast, Tweed Heads so if anyone knows any advice on Skyline engine rebuilders as the mechanic shop it is currently residing at are not specialists in that area. They've been amazing to deal with as they have been for the whole time my car has been going there over the years.

Seriously gutted...

Thanks in advance everyone.

14632709_1799994426882282_1734670811_o.jpg

14699629_1799994463548945_448876541_o.jpg

14699396_1799994396882285_1790505862_o.jpg

Nissan_Skyline_Front.jpg

V28VX37 Veteran

V28VX37

Posted
Posted

Ouch man that sucks, pretty rotten luck! My car's at the workshop at the moment for a head gasket so I've been going through similar questions.

I think a rebuild is probably the most expensive option, especially if all you're after really is a stock engine. Lots and lots of labour plus the risk of missing something in the assembly, unless you pick a really good workshop.

I reckon an engine swap is probably the way to go. You'd probably be looking at around 2k for a second hand Neo and another 2k or so in labour (unless you have a friendly shop) so 4k-ish all up.

If you were to sell, it sounds like the car is currently pretty much a rolling shell so would be tough to get a fair price for it. This said if you don't need the money now but can't afford to rebuild/replace the engine one option is to just let it sit for a while if you have the storage – the way the prices are looking at the moment is pretty stable.

  • Like 1
BlazenR34 Explorer

BlazenR34

Posted
  • Author
Posted
2 hours ago, V28VX37 said:

Ouch man that sucks, pretty rotten luck! My car's at the workshop at the moment for a head gasket so I've been going through similar questions.

I think a rebuild is probably the most expensive option, especially if all you're after really is a stock engine. Lots and lots of labour plus the risk of missing something in the assembly, unless you pick a really good workshop.

I reckon an engine swap is probably the way to go. You'd probably be looking at around 2k for a second hand Neo and another 2k or so in labour (unless you have a friendly shop) so 4k-ish all up.

If you were to sell, it sounds like the car is currently pretty much a rolling shell so would be tough to get a fair price for it. This said if you don't need the money now but can't afford to rebuild/replace the engine one option is to just let it sit for a while if you have the storage – the way the prices are looking at the moment is pretty stable.

Thanks for the detailed reply man i really appreciate it and it helped. I just still don't know atm what to do! There will be a solution one way or another i guess!

Cadmoon Grand Master

Cadmoon

Posted
Posted

Few questions, what is your plan for the car?

A daily driven one? Then an engine swap will be the cheapest. You don't necessarily need to go to a shop for that, a few mates with a bit of know how can do it in a day.

A weekend car? Again an engine swap is the cheapest.

Big power one day? Then pull the engine and do a forged rebuild. 

 

BlazenR34 Explorer

BlazenR34

Posted
  • Author
Posted
20 hours ago, Cadmoon said:

Few questions, what is your plan for the car?

A daily driven one? Then an engine swap will be the cheapest. You don't necessarily need to go to a shop for that, a few mates with a bit of know how can do it in a day.

A weekend car? Again an engine swap is the cheapest.

Big power one day? Then pull the engine and do a forged rebuild. 

 

I'd say atm it's a daily driver but i'm on and off overseas.

So mate it's looking to be an engine swap.

I think a big power pull would be up to 10-15k which i can't justify atm. She has lots of mods as does most but still standard engine internals and turbo so she's extremely clean atm

I want to keep her for a weekend car in the future but i'm not sure what my future career stuff is. Whether its here or overseas which is why this couldn't have happened at a worst time! I'm at a crossroads for a lot things...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...