Jump to content
SAU Community

Recommended Posts

Selling my carbonfibre bonnet for R32 GTR but i have had it fitted to my GTSt.

I managed to fit mine by altering the standard lock mechanism (it's actually just the angle of the lock mechanism that needs to be changed).

I have had the bonnet for 3months and i love it so much!! But it's an added extra i dont need as a struggling student.

This style of carbonfibre bonnet is the rarer of the two styles going around. As you can see from the pic it's not the UAS/Carmate style one. It also comes with the aero lip which i believe was added to deflect air into the radiator. These lips alone cost ~$300 in carbonfibre as this one is.

It was originally ordered from Works Auto in W.A. for $1250. As far as ive been told they no longer stock them.

CONDITION: Great overall condition. It does have a few scuff marks - ive never tried polishing them but there are only 2 small scratches and a small chip on the side of the bonnet that isnt very visible when the bonnet is on and closed. The overall effect is awesome.

Under the bonnet it has been modified to fit intercooler piping and BOV without touching. It is extremely light (you could pick it up off the ground with one hand).

I also have the matching GTR grille to go with it. Grille is like new. No marks at all.

PRICE:

Grille: $200

Bonnet: $900

PM me if interested. I can post to anywhere in OZ - i have a secure, protected box with padding.

As for the gap i can assure you the bonnet sits perfectly flat!!!

That photo was taken the minute the bonnet was fitted..... you have to make adjustments as with any bonnet. I only uploaded that pic cos quality wise it's the best ive got :D

Emails have been sent out.

Had numerous offers but still for sale.

Can do package for $1000

I will take it for $1000 to Melb.

WRONG!!!!!

If you'd read my first post you wouldve noticed that i said "This style of carbonfibre bonnet is the rarer of the two styles going around. As you can see from the pic it's not the UAS/Carmate style one."

We all make mistakes, but get your facts right before you try and sabotage a someone else's sale.

Let me repeat. This bonnet is rare. It is NOT available in Sydney or anywhere else in Australia as far as i know.

Are these legal in VIC?

Insurable?

If so might be interested

Not sure if they are or aren't. All i know is that i have been pulled over by police for rbt etc and they have never looked twice at it.

I highly doubt you'd have any dramas. Even if you did you just put back on your old one, clear up the defect and stick back on the c/f bonnet.

My car is insured and they know about it and dont seem to care.....

Im not offering any guarantees as obviously im in Sydney

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...