Jump to content
SAU Community

Recommended Posts

GTT Heater Core

Hi guys, 

 

So I'm about 97% sure my heater core is cactus (white mist in cabin when the heater is on without actually getting much heat, coolant in passenger side footwell, smells like melon in/outside my car, coolant leaks from pipe going into passenger side firewall, yeah you get it).

I was going to just follow the beaut tutorial that a majority of SAU's use on here when encountering this problem, but im having a hard time trying to track down a place to buy a brand new replacement other than used ones on ebay (and I hate buying parts from ebay).

Am I missing something here or is this just one of those parts thatre hard to come by now?

 

Thanks in advance! Think ive got my work cutout for me with this one

Link to comment
https://www.sau.com.au/forums/topic/467957-gtt-heater-core/
Share on other sites

I just got one from the radiator wholesalers (was about $70 many years ago - probably more now.. Have you tried your local radiator shop? Or another one? If they are not very helpful you might have to pull yours out and take it to show them what you are after. So far as I know they are all the same (Stagea, Skyline, possibly lots of other cars.).

Link to comment
https://www.sau.com.au/forums/topic/467957-gtt-heater-core/#findComment-7794784
Share on other sites

  • 2 weeks later...

Managed to get another heater core from Jack at Jack Phillips JDM which is on its way.

Took her for a spin today and she overheated something fierce so until the part comes in, I'm just considering re-routing the hoses and topping up with coolant. 

Are these the hoses I'll have to re-route?

IMG_2517.JPG

IMG_2518.JPG

Link to comment
https://www.sau.com.au/forums/topic/467957-gtt-heater-core/#findComment-7797401
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...