Jump to content
SAU Community

Recommended Posts

2 hours ago, DrNismo said:

hey mate

 

i'm in S.A never been to dealer myself buy have only heard good things on them(dealer).happt to go have a look say monday,tuesday and get ya a couple of pics i.e major rust spots etcetc

 

josh

Josh that would be great ! Will send you a pm ?

The car looks great.

Nice and original with original Japanese books.

Original 3 keys, nice tidy engine bay, original wheels and suspension height.

Original rear speakers and no ADR side blinkers. 

I think the N1 kit is tacky, leave the front bar but remove the front and rear spoilers as they seem badly warped anyway.

I'd replace the front spoiler with an OEM non painted one, and source a factory battery box. Other than that, visually you appear to have a spot on car.

Just check to see if it has the dreaded dash bubble, $1000 now for a straight bubble free dash in used condition and about $500 or a days labour to fit and swap them around.

Good luck with it, you could buy a whole lot worse!

Cheers,

Bob.

  • Like 2

Ah good job!!!
Yeah the fact it was a Vspec for a decent price is what drew me but to be honest it's my second 32 GTR (first reading much lower kms) and this one drives and feels very tight and fresh. All the signs of high km wear aren't there, especially while driving. Couldn't be happier as of yet. The guys at TP gave me paperwork showing that it was fitted with a dash in Japan reading higher mileage but its mileage before that swap was not documented

  • Like 1
On 07/01/2017 at 7:25 PM, Aussie_Delivered_R32_GTR said:

No....... I'm in Sydney.

I document the ads and noticed it sold on December 23........

Slightly higher kms but V-Spec and V-Spec II are commanding a premium.

Are you happy with it?

Bob.

Speaking of high prices...  Genuine Nismo spec is bananas.

Wonder if it's legit as per ad.

https://www.carsales.com.au/private/details/Nissan-Skyline-1990/SSE-AD-4358919/?Cr=16

I'm pretty sure the car is legit but it certainly doesn't present in a condition that suggests the low kms.

The ad has been changed because previously he mentioned something about the speedometer being changed but the odometer mileage is genuine etc.

It has a 260kph NISMO speedo which is not standard. The 180kph's were fitted to these cars.

The blued out seats and dash bubble concern me.

That said, if it is genuine unquestionable mileage these issues can be sorted for a couple of thousand dollars.

If it were local I'd be interested but got burnt with airfare costs on the 16,000 kms car for sale about 16 months ago. I was told it was 100% factory original yet told the then seller that I have a paint thickness gauge and anything over about 100 microns will confirm it's been painted and I won't be interested. He swore black and blue it never had paint etc..... ALL panels except roof and bonnet were painted! 350-600 microns EVERYWHERE! Was a shit job!

Long story, don't get me started!!!!!!!!!!!!!!!:3_grin::3_grin::3_grin:

4 minutes ago, niZmO_Man said:

I thought the Nismo ones did get the 260 km/h speedo? Going off memory of pictures of a showroom Nismo model.

No....... All dealer or aftermarket options.

Hard to see but if you look closely the kph numbers stop in the normal position as the 180kph.

Bob.

Nismo Brochure Dash..jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...