Jump to content
SAU Community

Recommended Posts

R33 tune now no a/c

So I've had a good search around and can't find much info on this. Basically i had my car tuned 2 weeks ago and it seems that the tune or whatever has been done has stopped my a/c from working. Could this be true? I had a auto elec have a look and he checked everything! and was confused as to way the compressor would not kick in unless it was earthed and the gas was spot on. I told him that its running a aftermarket ecu (powerfc) and he suggested that something could be wrong and it seems to be ecu related. I did a sensor check and its showing 0v Could it be something related to the powerfc? 

 

Link to comment
https://www.sau.com.au/forums/topic/468892-r33-tune-now-no-ac/
Share on other sites

Im not familiar with the software for power fc and not sure if the ac could be disabled from there, maybe someone else can chime in there but when I had a similar issue with my ac compressor not kicking in, it turned out to be the thermistor which is a temp sensor that sits in the ac core and tells the compressor when to turn on and off. Was just a bad contact on the plug. cleaned it, put it back together and has been fine since. This particular plug can be accessed by removing the glove box and backing plate, it is mounted to the top left of the white box, Its a bit tight but reachable. Should only take 5-10 mins to get to it and check.  As far as the ecu goes, maybe give your tuner a quick call and ask.

  • Like 1

I dont recall a setting to turn off the AC on fc edit. There are settings for idle when AC is on or off but that's about all i remember.

Go into sensor/sw check on your hand controller and watch the AC and ACR dots. I think (and I could be wrong) that one indicates the AC unit is turned on and the other should come on when the compressor kicks in. (On is black dot off is white dot)

Had my tuner hook his laptop up and we had a look around. The only option to do with a/c was revs when its turned on. Had a play around today with a test night on the ecu when i tried pin 9 (ac relay) the compressor fired straight up. Waiting to try another thermistor  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
×
×
  • Create New...