Jump to content
SAU Community

Recommended Posts

Garage Sale R32 GTR RB26 (ECU, Fuel Rail, Injectors, AFM, AFR Gauge, Intercooler, Brakes)

Hey guys, 

Got a few parts that became spares after upgrades. Located south west Sydney and would prefer pickup. If postage necessary, it'll be at buyers expense. 

 

320kw package - $1000 for everything

  • Apexi Power FC with hand controller tuned on 98ULP - $450
  • Standard fuel rail with Sard 700cc injectors - $250

  • 2 x Z32 AFM with Tomei plugs - $350

  • Standard RB26 exhaust manifolds - $100

  • Standard RB26 dump pipes - $100

 

Brand new AEM Uego AFR meter (rrp $300) - $200

 

Mines ECU could probably use for the case - $50

 

A-pillar twin gauge holder (suit R32) - $100

 

Golpher china spec alloy radiator - $40

 

Standard RB26 intercooler - $100

 

Standard RB26 twin turbo pipe - $50

 

Standard RB26 front brake package - $300 for everything
  • Calipers (unknown pads) - $200
  • Rotors standard size (unknown brand) - $100

  • BM50 brake master cylinder - $100

 

Happy to hear offers. Just want to see it gone really.

 

Thanks, 

Slav

IMG_4623[1].JPG

IMG_4624[1].JPG

IMG_4625[1].JPG

IMG_4627[1].JPG

IMG_4628[1].JPG

IMG_4630[1].JPG

IMG_4631[1].JPG

IMG_4634[1].JPG

IMG_4635[1].JPG

IMG_4636[1].JPG

IMG_4639[1].JPG

IMG_4638[1].JPG

IMG_4642[1].JPG

IMG_4641[1].JPG

IMG_4646[1].JPG

IMG_4645[1].JPG

7 minutes ago, justjoshinyam8 said:

Details on radiator?

China spec alloy. Pretty sure it's the same thickness as stock. 

1 hour ago, Dave76 said:

Would you take $150 for the air fuel gauge where are you located at

Sorry mate. Sold pending payment. 

Updated list:

  • Apexi Power FC with hand controller tuned on 98ULP - SOLD PENDING PAYMENT
  • Standard fuel rail with Sard 700cc injectors - $250
  • 2 x Z32 AFM with Tomei plugs - SOLD PENDING PAYMENT
  • Standard RB26 exhaust manifolds - $100
  • Standard RB26 dump pipes - $100 

    Brand new AEM Uego AFR meter (rrp $300) - SOLD PENDING PAYMENT

  • Mines ECU could probably use for the case - $50

  • A-pillar twin gauge holder (suit R32) - SOLD PENDING PAYMENT

  • Golpher china spec alloy radiator - SOLD PENDING PAYMENT

  • Standard RB26 intercooler - $100

  • Standard RB26 twin turbo pipe - $50

 
  • Calipers (unknown pads) - $200
  • Rotors standard size (unknown brand) - $100

     

  • BM50 brake master cylinder - $100

     

  • 3 months later...

Updated list:

  • Apexi Power FC with hand controller tuned on 98ULP - SOLD 
  • Standard fuel rail with Sard 700cc injectors - $250
  • 2 x Z32 AFM with Tomei plugs - SOLD 
  • Standard RB26 exhaust manifolds - $100
  • Standard RB26 dump pipes - $100 

    Brand new AEM Uego AFR meter (rrp $300) - SOLD 

  • Mines ECU could probably use for the case - $50

  • A-pillar twin gauge holder (suit R32) - SOLD 

  • Golpher china spec alloy radiator - SOLD 

  • Standard RB26 intercooler - $100

  • Standard RB26 twin turbo pipe - $50

  • Calipers (unknown pads) - SOLD
  • Rotors standard size (unknown brand) - SOLD
  • BM50 brake master cylinder - SOLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...