Jump to content
SAU Community

Recommended Posts

Jeremy's A31 Cefiro

Hey everyone. I'm new to Nissan's with this A31 Cefiro, but luckily, I'm in the motherland :laugh:. I just picked up this Cefy, and luckily she is old enough for me to take her with me when I have to leave in September.  Nothing definitely solid as far as plans for her yet, but I do kinda have a general idea.  For now I'm going to stick with the RB20DET she came with since that will make it easier for me to ship and import if I have to go back to the US.  So for now I'm looking to do cams, injectors, and a bigger turbo, along with a standalone ECU.  Haven't decided just yet on the interior, but I really like the look and feel of the Bride Euroster seats.  The car is pretty much bone stock other than some basic audio upgrades.  Anyway, here she is.

IMG_0277.JPG

IMG_0278.JPG

IMG_0279.JPG

IMG_0280.JPG

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/469054-jeremys-a31-cefiro/
Share on other sites

  • 1 month later...

Haven't been able to do much on the car lately other than acquire parts.  I did manage to put in a set of Splitfire coilpacks, replaced spark plugs, changed oil, and replaced the air filter.  So far I've managed to stockpile a set of LMGT3's in 17x9 4 lug, a set of S13 coilovers (HKS rear and KTS fronts), a Nismo 2-way (I need to find an ABS rear end though so I can build though so I can build the assembly then just put it in the car instead of the car being down for however long it takes me to do it), a Haltech Elite 2000 with patch harness, and a stock R32 GT-R crankshaft.  This is in addition to the body kit I bought from a friend, RB25 block and transmission.  So far the plan is to drop 26 internals into the 25 block and build for somewhere between 400-500 HP.  Also, I found out that I am going to Ramstein, Germany next, so I'll only be about 160 km from the Nurburgring.

Edited by JaysCefy
  • Like 1

Someone with more knowledge than me should know if it's even possible (I don't think it is), do some googling. Plenty of people on here pushing 320+rwkw on stock rb25 internals. Just freshen the stock motor up and you'd be good to go. Putting a RB25 neo head on a 25 is just as good as having a 26, without the oil issues.

  • 2 months later...
  • 5 months later...

Sorry, for being completely AWOL on the thread lately.  Got busy getting ready to move and everything.

Status update:

Got the LMGT3's mounted but was slightly mistaken on the size. The fronts are 17x8 and the rears are 17x9

Also, ignore the flat tires, they were aired up right after the picture was taken.

The suspension will be sorted out once I get the car fully registered so that nasty wheel gap will go away.

Trying to decide what the next upgrade/project will be.  I have the Haltech that I can "install" since it only requires swapping two injector pins on the harness.  Has anyone used the supplied RB20 map to run a stock engine? I'm assuming for completely stock it should be pretty accurate.

I also have the Nismo 2-way that I can put together.  I kinda want to look at changing the ring and pinion to get a different ratio.  If I remember right the Cefy is 4.3 which keeps the revs a little high for autobahn driving.  I'd like to see about swapping to a 4.1 or maybe 3.9.  Has anyone done this on a Cefy and have can give me their take on it?  Hopefully I will be more consistent with working on the car now that I will be here for a few years.

cefy_nismos.jpg

  • 4 weeks later...

No real progress on the car since the Nismo wheels had a leak around the valve stems, so I'm waiting on replacements.  For now I'm using the original wheels with some cheap winter tires I picked up.  Once I get up to decent speed (90+ km/h) I get a lot of wind noise, so I'm looking to replace all the rubber door seals.  Does anyone know of a good place to source those from?  Also, I want to adjust the latch on the doors as a couple of them seem a little bit looser than I think they should be.  Anyone know the process for doing that?

  • 2 months later...

Minor update, I think my headlight stalk shit the bed. My headlights got to where they would switch on the high beams with no gauge lights. Checked the fuses and relays. Fuses were good and best I can tell the relays are good too.  Tried to clean the contacts in the switch and got one low and high beam to come on left side, nothing on the right side.  So anyone got an A31 or C33 switch they don't mind parting with? Needing something ASAP to get her back on the road. All other projects are sidelined until I can get this sorted out and I really don't want to attempt wiring in a toggle switch if there is absolutely any way to avoid it.  I found a post from Dorigecko about 8 years ago saying he had one, but that was 8 years ago lol.

  • 5 months later...
  • 2 weeks later...

@Swz3 Thanks.

Finally got off my lazy ass and did a little bit more work on the car.  Not having my own garage anymore really sucks.

I tracked down a new headlight switch and got that put in.  I also installed a USB port in the center console instead of having wires trailing from behind the head unit.  In addition to cleaning things up a little bit, it also allows two phones to be plugged in, one charging and one sending audio to the stereo.  I also finally got around to replacing the valves in my LMGT3s.  While I had the tires off, I split the center off and plasti dipped them black.  The wheels need to be refurbished anyway and I will get them professionaly powdercoated/painted then, but wanted to test the look for a bit before I spent that kind of money.  This weekend (hopefully) I will get around to putting the suspension on to bring it down a little bit.  We'll see what happens after that.

cefy.jpg

usb.jpg

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...