Jump to content
SAU Community

Best offset to suit GTR34

MissGTR34

By MissGTR34,
in Exterior & Interior Styling

 Share

Recommended Posts

MissGTR34 Contributor

MissGTR34

Posted
Posted
Best offset to suit GTR34

Wondering if anyone has advise about best aggressive wheel offset for 34gtrs without fender mods, 

 

Currently looking at:


[F][!] 5-114.3 19x10.5 +15
[R][!] 5-114.3 19x10.5 +15

 

any advice appreciated cheerz!

Link to comment
https://www.sau.com.au/forums/topic/470154-best-offset-to-suit-gtr34/
Share on other sites
IMACUL8 Veteran

IMACUL8

Posted
Posted

If you go 10.5 wide you will need to go 285 or 295 wide tire. Whatever you do dont go 10.5 wide and put a 265 or 275 stretched tire on there !  Stretched tires on a gtr is on par with neons!

Check out this thread --> 

 

 

  • Like 1
MissGTR34 Contributor

MissGTR34

Posted
  • Author
Posted
3 hours ago, IMACUL8 said:

If you go 10.5 wide you will need to go 285 or 295 wide tire. Whatever you do dont go 10.5 wide and put a 265 or 275 stretched tire on there !  Stretched tires on a gtr is on par with neons!

Check out this thread --> 

 

 

Hey i checked it out, i guess the next question is (because i want to run the emotion D9R's as well, would anyone reccomend staggered? Or would 10.5 be ok on the front as well? 

Id probably run 285 tyres but by the looks of the thread above id still need to heat the guards too.. so many choices 

baicai Community Regular

baicai

Posted
Posted

Im running 18x10.5 +15 lmgt4's with 295/30/18 front and rear, slight rubbing on full lock. Previous owner had 19x10.5 te37 with 275 and it rubbs on inner fender plastic. I think 275 is the biggest tyre you can run on 19s, if you want 285 or more then stick to 18s.

  • Like 2
djvoodoo Experienced

djvoodoo

Posted
Posted (edited)
17 hours ago, MissGTR34 said:

Hey i checked it out, i guess the next question is (because i want to run the emotion D9R's as well, would anyone reccomend staggered? Or would 10.5 be ok on the front as well? 

Id probably run 285 tyres but by the looks of the thread above id still need to heat the guards too.. so many choices 

I have D9R's in 19 x 10.5 + 15 on my GTR.

I run Hankook 275 x 30 x 19 and there is only a tiny bit of stretch .. certainly not hella stretched brosef stance though.

20160827_100401-01.jpeg

Edited by djvoodoo
  • Like 1
MissGTR34 Contributor

MissGTR34

Posted
  • Author
Posted
4 hours ago, djvoodoo said:

I have D9R's in 19 x 10.5 + 15 on my GTR.

I run Hankook 275 x 30 x 19 and there is only a tiny bit of stretch .. certainly not hella stretched brosef stance though.

20160827_100401-01.jpeg

Thats the exact offset and size i was going to go for, any scrub on full lock? 

djvoodoo Experienced

djvoodoo

Posted
Posted
1 minute ago, MissGTR34 said:

Thats the exact offset and size i was going to go for, any scrub on full lock? 

No scrub on full lock in any direction, but i used a heat gun on the inner arch liners and pushed them back. I'm running about an inch lower than standard Vspec suspension on Tein Super Streets

  • Like 1
  • 11 months later...
djvoodoo Experienced

djvoodoo

Posted
Posted (edited)

Thread revival & update.

So i moved on from the Work D9R and have gone with Work Meister S1 3p in 19 x10.5 +12.

Ended up going with a Kuhmo ECSTA PS91 tyre - 285 30 19. According to "will they fit" website, this makes the rolling diameter/circ exactly the same as the stock 245 40 18 wheels on an R34.

So, how's the fit?

Well, it's certainly the widest max tyre you can go without installing Camber arms etc. Tyres poke ever so slightly, and front right does rub on full lock, but i'll fix that by removing one of the bolts that hold the BOV adaptor. That seems to be my issue.

Raised the front coilovers by 10mm for more clearance as my Vspec lip has seen better days. Coilovers are Tein Flex, and set 5 odd clicks from full soft. Very compliant on the road.

Rears are fine, but cutting it close. Rolled rear guards or more camber could help, but i wasn't getting any rub (going over speed humps/ acceleration squat/ turn in/ cornering) all seemed fine.

285 30 19 are better than a 275 35 19, but very little room to play.

 

20180329_193751-01-01.jpeg

Edited by djvoodoo
  • Like 1
  • 7 months later...
NZSKY Explorer

NZSKY

Posted
Posted
On 4/24/2017 at 1:38 PM, djvoodoo said:

I have D9R's in 19 x 10.5 + 15 on my GTR.

I run Hankook 275 x 30 x 19 and there is only a tiny bit of stretch .. certainly not hella stretched brosef stance though.

20160827_100401-01.jpeg

this is literally the pic that made me buy d9Rs

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      iPad gauge cluster

      By PranK · Posted

      Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...