Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

I really can't say - nothing to compare it to other than the stock ECU - It just sits there and works - (no hand controller).

The car idles, no flat spots, seems easy to tune (I don't touch it though cause I have NFI)

I don't know too many other people using the Stinger on their Skylines - JulianGST from these forums does and he is happy -

One thing I did notice with both our cars (saw this happen to Julian at EC), is that when you dump it - lots of black smoke from the exhaust. I understand this indicates richness, which is a good thing, but the cars behind me may not appreciate it...... he he

I might think about changing the EMS after the engine rebuild, but I want to speak to a few more people & do a bit more research first,

have you got a blow off valve that vents to the atmosphere? cos if you are still running airflow meters then you'll get a plume of black smoke on gear changes as you get a rich injection of fuel as it delivers fuel based on the air the AFM has measured and half of it has been released through the bov. Another reason could be that the air/fuel ratio's get richer as you go up the rev range... a good tune to even it all out will fix that.

yeah, thought about that Joel and is a good option - but for some strange reason - I feel compelled to keep the original engine number ?? Dunno why maybe cause i don't want to go through blue slip process again (after the one it went though at time of import) - I will think about this some more though....

Can you link to the RB30E guide you mentioned ??

Cheers,

Originally posted by GiJOr33

have you got a blow off valve that vents to the atmosphere? cos if you are still running airflow meters then you'll get a plume of black smoke on gear changes as you get a rich injection of fuel as it delivers fuel based on the air the AFM has measured and half of it has been released through the bov. Another reason could be that the air/fuel ratio's get richer as you go up the rev range... a good tune to even it all out will fix that.

GiJOr33,

The EMS doesn't use AFM - THe BOV used to vent to atmosphere, but I got it change to plumback now cause I hated the noise (drew too much attention) and I wanted it be legal.

INASNT,

They are stock injectors high flowed to 610cc - I understand that the flow tests were documented, but I never saw the paperwork - So that's why I wanna get them tested again - to be sure, to be sure.

Also I have heard good and bad things about High Flowing injectors (retrespective to my mods being done) - If I get the results back and the flow and spray pattern (don't know if they can test this) are OK, I will re-use them - If not, I'll be up for new injectors & prolly rail with the rebuild. I'm hoping they will be OK. If not, then It may be one explanation for my little problem.

I wanna get it 200% right

Cheers,

Guest MFX_R33

I have an EMS (not the stinger though) in my skyline and it runs well. I have only had a few problems with it stalling on back off with the aircon on, but that is cause it doesn't currently have a separate tune for the a/c. It is also a bit to do with my large throttle body.

Jeff.

Originally posted by INASNT

B Man

i am most probably getting sard 500cc side feeds for mine. They are around $125 each from greenline at the moment. How much did the high flowing cost u?

Not sure about cost as I got a package deal.

I understand the sard ones will need a new fuel rail and maybe some sort of adapter for them to fit ??? Not sure tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...