Jump to content
SAU Community

Recommended Posts

But remember the more you raise the rail pressure and ram more fuel throught the injector you change the spray pattern

And you have to leave some headroom in the fuel pump for boost. :headspin:

Around 45psi rail pressure.  its a trade off.  aftermarket inj. cost tons, raising the rail pressure costs F A.  If u had the coin to need 65psi rail pressure u would change the inj anyway.

And since most fuel pumps are rated at 73.5 psi, you would only have 8 psi left for boost. That's not much :wassup:

How long will your fuel pump last if you fit a FPR - ie compared to if you didn't fit a FPR ??

A) The same as if you didn't fit the FPR ?

B) Less because you are labouring the Fuel Pump ??

c) More because of some unknown reason ??

I suspect (B)

And since most fuel pumps are rated at 73.5 psi, you would only have 8 psi left for boost.  That's not much :wassup:

To get that sort of power I assumed you would already be on boost. Surely an aftermarket rising rate regulator will allow you to maintain a slightly elevated fuel rail pressure and then rise it to 65psi by the time you are on full boost.

I don’t have a problem with using a RRR, but if you are pushing that type of power (and I am assuming you have replaced the turbo, fuel pump, computer, intercooler) then surely the cost of injectors is worthwhile even if it’s just insurance for your motor.

How come I get 92-94% injector duty quite regularly with 0.85 bar and standard turbo?

 

One day it hit 100% when i wasn't looking but it seems to have these microsecond spikes like 65% when you've barely touched it.

Car is running rich?

To get that sort of power I assumed you would already be on boost. Surely an aftermarket rising rate regulator will allow you to maintain a slightly elevated fuel rail pressure and then rise it to 65psi by the time you are on full boost.

Yep, that means full boost is 8.5 psi. :rolleyes:

Car is running rich?
You should see my fuel bills! Jeez man. Weird thing is, at the track the exhaust goes brown like it's running lean.

I'm thinking of putting a 2nd hand SAFC in there till I can afford an emanage and a good tune. The ECU I have makes it run so smooth but I think it's just putting way too much fuel in.

Magic1s GTS has 435rwhp on stock injectors and uprated pump,this is the most we have seen sofar on stockers and we have never had any problems at high fuel pressures.

We will fit a bigger pump and see how we go.

This power is in shootout mode.

I see around 80% duty cycle from my 550cc injectors with no FPR and Bosch 044 pump with around 312kw@wheels.

I see around 80% duty cycle from my 550cc injectors with no FPR and Bosch 044 pump with around 312kw@wheels.

That's about right, I have seen around 565 to 570 cc's out of injectors rated at 550 cc's.

So 570 X 80% / 1.34 - 60 = ~300 rwkw

Your 312 rwkw is a pretty good effort. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...