Jump to content
SAU Community

Recommended Posts

M35 rough idle / shudder

Hi,

I've recenly had problems with the car and would like to know if it sounds familiar.

Symtoms :

- Rough idle : the car does not stall but you can definitely feel a  shudder 

- Shudder also present when driving, especially around 2000-2500 rpm

Coming from the engine 100%, it is less noticeable once the turbo kicks in but there is a slight power loss too. 

Problem has increased in intensity when I was driving it home.

If someone could point me in the right direction that would be great.

Mechanical skills close to null, if someone around Sydney is keen to have a look at it, I'd obviously pay for your time, but I can of course try a few things on my end too.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/471304-m35-rough-idle-shudder/
Share on other sites

24 minutes ago, valf said:

M35 rough idle / shudder

Hi,

I've recenly had problems with the car and would like to know if it sounds familiar.

Symtoms :

- Rough idle : the car does not stall but you can definitely feel a  shudder 

- Shudder also present when driving, especially around 2000-2500 rpm

Coming from the engine 100%, it is less noticeable once the turbo kicks in but there is a slight power loss too. 

Problem has increased in intensity when I was driving it home.

If someone could point me in the right direction that would be great.

Mechanical skills close to null, if someone around Sydney is keen to have a look at it, I'd obviously pay for your time, but I can of course try a few things on my end too.

Cheers!

Contact m35stagea on this forum, he can help scan your car for fault codes.

 

1 minute ago, West said:

Contact m35stagea on this forum, he can help scan your car for fault codes.

 

Ok, will do thanks!

One more thing is that there is no lights on on the dash. No engine light nothing. Not sure if the diag will show something if engine light isn't even coming up :/

1 minute ago, valf said:

Ok, will do thanks!

One more thing is that there is no lights on on the dash. No engine light nothing. Not sure if the diag will show something if engine light isn't even coming up :/

Not sure but no hurt trying right? 

This guy also know a fair bit about M35, or Scotty on this forum as well but since you're in Sydney and m35stagea is also in sydney.

On 22/07/2017 at 5:54 PM, valf said:

Do you have a link for the oem coil packs / spark plugs? 

I'll change those and head over to m35stagea's place to give the car a scan. 

Thanks for the help! 

OEM are like $850. I got my NGK ones from Veales for $600. Spark plugs you can get from Super cheap for $120

  • Like 1
  • 2 weeks later...
  • 3 weeks later...

Finally received the coil packs yesterday,

Started changing it today, went quite well on the passenger side (remember, I've close to no mechanical experience).

I don't know where to start on the driver side though because the middle coil is hardly accessible.

Can someone tell me how to proceed ?

On the bright side, I've started the car and it runs perfect so I got lucky, the faulty one was one of the first 3 I swapped :)

All done, thanks everyone! Glad I did it myself, will go to bed less stupid than I was when I woke up [emoji4]

Give yourself a pat on the back. Great to see people having a go. DIY is the way to go for most of these minor little odd jobs[emoji106]
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
    • Looks great, but I'm always concerned that it makes it difficult to see what level the fluids are at. Am I overthinking this?
×
×
  • Create New...