Jump to content
SAU Community

Idling then dies

Skurt
 Share

Recommended Posts

Skurt Rookie

Skurt

Posted
Posted
Idling then dies

IDLING ISSUES!!
Hey guys, I have a 1994 r33 gts25t auto (rb25det). On cold start I have to use the throttle to get it going and use the throttle to warm it up. When it's warm 5 mins later I release the throttle for it to idle and it slowly dies. Start it back up with no throttle and she runs mint for 30 seconds then it dies again. Within that 30 seconds I can touch the throttle and it will idle until 30 seconds is up then again....it dies. Try to blip the throttle after that 30 seconds and it dies again. I have...

Resoldered the afm and fitted another working afm.
Replaced aac valve.
Set tps to .45V.
Fitted another relay for a constant 12V to the fuel pump.
Opened up cold start valve and it was clean as.
Vacuum tested the intake and no leaks occurred.

Removed and cleaned throttle body right up.
Checked ecu for codes, nothing appeared.
Replaced temp sensor.
BCPR6ES gapped to .8.
Cleaned cam angle sensor.
Checked ecu for any burn or corroded connections inside.

 

Anyone please help me if they have had this issue, I've never heard of it happening.

Link to comment
https://www.sau.com.au/forums/topic/471382-idling-then-dies/
Share on other sites
Skurt Rookie

Skurt

Posted
  • Author
Posted

I pressurized the inlet system for any vacuum leaks and there aren't any, visually looked at all the lines also.

 

While driving I have to double foot it so it won't die at lower speeds and stopping. (Just the same idling issue) I feel like something is drawing the current iswell because it won't start after a couple days of not starting. It slow cranks when that happens but then some times it's starts up ? it is charging, I checked with a multi meter. Maybe need to do another test of some sort? 

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Pressure test the fuel system. FPRs rarely fail but good to check. have you replaced the fuel filter in the engine bay? Long shot if you can swap out the ecu with someone just to eliminate that as a problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...