Jump to content
SAU Community

Recommended Posts

All items are located in SE Melbourne. But I do work in the city so happy to bring the item into work and meet up there.

Best bet is to SMS me on 0402346691 and I'll reply when I can.

Tomei Hicas Lock II kit (To suit BNR32 and other Nissans from the same era - please see link for full listing)
Brand new (Unopened) - imported from Japan. Nobody likes HICAS hence why I bought the kit... but not something I'll be able to utilize effectively due to change in car plans.
Contents as per link http://www.tomeiusa.com/_2003web-catalogue/e190_others_drivetrain.html

24130496_10156033879392269_3080641721804545160_o.jpg.eccc6058708ded03a1de09707944225d.jpg

Price: $115

Nismo 320km/hr speedo cluster (Late model - blue circuit film backing)
Purchased recently off another seller but have had to sadly change the plans for my car. Has 166k kms on the speedo. All tabs in good condition.
This won't suit earlier model BNR32s. Would prefer pick up/Melbourne sale just to ensure safe carriage.

24059547_10156033879432269_1714403227082160772_o.jpg.5a4bb51718d59171bb7164086e3b92e2.jpg

Price: $320 

HEL braided brake lines (To suit BNR32, brand new unopened)
Brand new HEL braided brake lines. Change in car plans hence sale.
Improve pedal feel and replace those aging rubber lines! (Please ignore Cusco arms in pic)

24129785_10156033879427269_2470167977757390019_n.jpg.535924686f2d77ad2f36578bb4e5d7c2.jpg

Price: $140

16 hours ago, Bart Japan said:

Do you know where the electrical box goes and what it does?

The electrical box wires into the Hicas unit and disables the warning light while with the shims, locks the hicas rack into a fixed  position.

Good option if you don’t want to muck around with power steering lines.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...