Jump to content
SAU Community

Recommended Posts

5a646ded04681_Round01Feb-25-2018.png.de378f602d6746daf46ded12ccf09f14.png

Please enter online via our google form and follow the payment link.

https://drive.google.com/open?id=127pIIQaLXNTFwtak-lDbWH3h7WiS00u2C9uMsudMRKE

$249 for SAU VIC & WRX Member | $299 for everyone else

Level 1 (Come n Try) Licenses are $25 each and are purchased on the day of the event.

This event is capped at 40 entries to maximise track time, 5 groups of 8 cars each. There will be 1 Come N Try group only, so first in first served.

Broadford is a hidden gem and is difficult to book (as the motorcycle clubs get preference). It's also relatively expensive to book, SAU VIC looses money on this event but we conducted it because our member base likes the venue.

Canteen will be open all day for food and drink.

Video from last year here 

Some info from our scrutineer, please read.

Good afternoon All Competitors & Come and Try Entrants. Your competition vehicles will be scrutinised by myself (Haider Butts) on the day of this event. I will like to take this opportunity to remind you of some recent updates in General Requirements for Cars and Drivers. In this post I will only mention the ones that affect competitors and vehicles at this event. I would highly recommend you to read this recent update in requirements in your own time:

http://docs.cams.com.au/…/GQ00-Regulation%20Modifications-2…

1. Display a blue triangle to indicate location of the battery even if it is in the standard location of that vehicle. An additional triangle to be added if the battery is located inside the cockpit on or adjacent to the battery.
2. A visible towing point capable of accepting a 40mm cylindrical test object. 
3. A fire extinguisher must display:
a. Capacity
b. Type of extinguishant
c. Weight and volume of the extinguishant
d. Date of manufacture of the extinguisher
4. A fire extinguisher of minimum 900gms weight which meets AS1841 standard must be installed using a metal bracket within the reach of the driver fully harnessed. All drivers will be required to undergo this check at the time of scrutiny. 
5. Fire extinguisher service tags are no longer accepted by themselves. A certificate of service is required on paper for each fire extinguisher installed in the vehicle.
6. SABELT Harnesses, I will be using the following identification post from CAMS to pass or fail SABELT seat harnesses. Please take a moment to read this carefully and if affected replace your SABELT harnesses before this event. Failure to do so may result in failing scrutiny. 
https://www.cams.com.au/…/officials-newsletter-issue-4-scru…
7. A harness tagged “FOR FHR (frontal head restraint) Use Only” shall be only permitted if the driver is using a FIA certified FHR Device. Failure to produce a FHR device will result in fail scrutiny.

That all for now. If there are any other changes that apply to this meeting I will update this post. So watch this space.

I will be attending the Victorian Scrutineers meeting on the 20th of February. If you wish me to raise any questions or seek clarifications on your behalf in this meeting, please message me directly on Facebook. I will have your answers posted by COB 21st of February.

 

Entry List (17-02-2018 15:34PM)

# Driver First Name Driver Surname Car Make & Model
1 Tim Dinh Ford Fiesta ST
2 Brett Patching WRX 
3 Matt Lowth BMW M4
4 Aaron Barnes Mitsubishi Evo IX
5 David Marinucci Toyota Prius
6 DAVID BLUNDEN SKYLINE 1997 R33 GTST
7 Sam Lehmann Nissan Skyline GT-R
8 Zikang LUO Toyota 86
9 Ash Stacey 2017 Nissan GTR 
10 Theo Kornaros Mitsubishi Evo9
11 Eddie Sansil Mitsubishi Evo IX 
12 Nick Petrovski 2013 Mitsi Evo X
13 Andrew Collins Nissan R31 Skyline
14 Rhys Postlethwaite R34 2dr GTT 
15 Trevor Ng Lotus Exige
16 Aaron Doble Nissan Skyline GTR
17 Nick Cateaux 1993 Mitsubishi GSR AWD
18 Jeremy Blackman Nissan Skyline ECR33
19 Paul Richardson Subaru GD WRX
20 Clayton Sinclair Nissan R34 GTR
21 Tony Avramides Nissan Skylne R32 GTR
22 david bosa Renault 182 F1 Clio Cup
23 Daniel Fencheno Renault Clio 182
24 Edoardo Costa Subaru BRZ
25 Jian Cai Pook Toyota Supra
26 Chris Starr Bmw 328is
27 Alan Wilson Subaru WRX
28 John  Wilson Subaru WRX
29 joel bryar 2016 CLIO RS TROPHY
30 Tim Milford-Cottam EVO 7
31 Peter Blythe R33 GTR
32 Jeff Beable R35 GTR
33 Martin Sullivan Nissan 200sx
     
  • Like 1
  • Haha 1
8 minutes ago, hot richard said:

Is it 250 for the come and try also?

If you're an SAU VIC / WRX Vic member is $249 plus the Come n Try License cost, else it's the Everyone else cost plus the Come n Try license.

L2S

 

So just checked belts (which I prob should ahve done first)

 

there 2 tags one says not valid after 2018, 2nd says build date of Feb 13

 

So am I good for this event? (obviously need to replace prior soon, but just working out bear min to get car back on track)




  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drive beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...