Jump to content
SAU Community

Recommended Posts

2015 WRX STI

12 months rego

$39000

34000km

Pulse "Stage 3+" kit

All work by Pulse Racing in Menai

ECUTEK

Invidia TBE

Process West TMIC

Process West CAI

550hp fuel pump

White Line F & R sway bars

Grimspeed AOS

GFB Respons BOV

Mishimoto oil cooler with thermostat 

Enkei RS05RR 9.5 x 18 + 40.

New 245/35 18 Pirrellis

Front and rear crash cameras

Alarm

Rhino roof racks

Window rain guards

Other bits and peices

No swaps (unless you have a low km NB series 4 SE ?hard top? which could be part payment, maybe)

No "test drives" unless you can flash the cash

Email me on: [email protected] to organise an inspection, the inspection will be in Holsworthy

Im in no real rush to sell so don't bother low balling as I will not reply, this is a fair price, look at every other one, then look at this

Alot of SAUNSW members will know me and how I look after my cars

Car has been my daily driver

Mature owner, well I'm 52, actual maturity may vary

Modified so when I'm driving the car sounds the boss and I can think I am Colin McRae on the special stage of "going for a drive".

20180208_183913.jpg

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/
Share on other sites

  • 2 weeks later...

Also comes with a Torx t70 socket for draining the gearbox, all drivetrain oils, front diff/gearbox and rear diff were changed at 15k km using Penrite full synth.

Engine oil, Nulon full synth 0W40, and filter changed every 5k km.

Brake fluid had 2 full flushes, one at 5k km, the other at 20k km.

Full lip kit.

Car cover.

The Blackvue duel cameras also have a battery saver wired it, all professionally installed.

If you have a shop where you want it inspected on a hoist I can go for that as long as its not to far away and work permits, Pulse Racing and GEM are close to me, all at your cost of course.

Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/#findComment-7868923
Share on other sites

Thanks guys, I built it to be fun and reliable.

I'm after something else to play with now as the kids have just got their licences I don't need 4 doors and 5 seats, plus as the car is restricted the kids cannot taxi me around after I have had a beverage or two. 

I need something fun but also p plate friendly, hence the MX5, "again".

Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/#findComment-7870114
Share on other sites

$38,500.

Best value for money VA STI on the market.

Coming up to 35k km, so, It's getting engine oil and filter done this week. More Nulon 0w40 goodness.

Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/#findComment-7870447
Share on other sites

$38,000 firm

Seems like no one is looking for one, the cars on the for sale web sites don't seem to be moving to quick either, even though mine is in better condition, has all the good bits and is priced more competitively for a quick sale.

The car has had over 10k$ in quality mods.

 

Stock STI's aren't that impressive, but once you free up the inlet and exhaust, give the rubbish OEM tune a tweek, they really wake up.

 

As for the tune, I told Paul from Pulse Racing to give it all the good bits, but to ensure the car is 100% reliable as a daily, it's making just over 200kwatw which he said was the happy place for longevity, the also recommend and supplied all parts, except for the GFB BOV, that was all me, the BOV is the respons type, so it's manually ajustable from closed all the way to full VTA for hectic Pttsssss goodness for when I'm feeling silly, currently set at about 30% VTA, so it's only slightly hectic at the moment.

If it doesn't sell for 38k I'm keeping it and buying a beater so the kids can be my personal Uber.

Thanks for the comments.

Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/#findComment-7870704
Share on other sites

2 hours ago, mlr said:

Yeah nah. Been there, done that.

:7_sweat_smile: worth a shot lol..

I'm over mine but don't want to sell it for peanuts to little nubs on facebook.

 

Link to comment
https://www.sau.com.au/forums/topic/473325-2015-wrx-sti/#findComment-7871368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...