Jump to content
SAU Community

Recommended Posts

hello all, I have done a bit of searching and am yet to find the answers I seek, I am wanting to get the Nistune upgrade done as soon as possible, to go with the new high flow hyper gear and injectors etc that will be getting installed very shortly, yet I seem to be having issues in finding a reliable installer and tuner that will respond, I've heard many good things about a certain tuner on the eastern side of Melbourne but after 4 attempts at contacting them to see when I'd be able to make a booking etc I have given up and am seeking recommendations, even after I sent them at their request the list of mods that are currently done, as well as what is about to be done to the car, still only got crickets from their end.....I am from Ballarat about 1 1/2 hours drive west from Melbournistan, and don't mind travelling for the right shop .

car is a series 2 RS4 tiptronic auto Stagea, so come on peoples hit me up with some recommendations

I don't know if it is still the case (get on the phone and find out) but I believe Nistune will install their chip on your ecu -courier both ways shouldn't take too long. As to tuners - the best usually have no shortage of customers so if you want the best be prepared to persevere with your efforts. Should be easier if you already have the chip installed and just need the tune.

ok cheers for that, once the Nistune is installed onto my ecu I'm guessing it wont be drivable anyway because of the new injectors, turbo , AFM etc, so either way it'll need to be trailered/tilt trayed to the tuner, but what you have suggested may save a bit of time 

29 minutes ago, oxford1327 said:

ok cheers for that, once the Nistune is installed onto my ecu I'm guessing it wont be drivable anyway because of the new injectors, turbo , AFM etc, so either way it'll need to be trailered/tilt trayed to the tuner, but what you have suggested may save a bit of time 

Nistune may install a start up tune that will enable you to drive carefully to the tuner if you give them all your details.

5 hours ago, Leroy Peterson said:

If youre still interested in eastern suburbs, CMS is easily contactable and is a Nistune distributor. Shane has a background in electronics and does install nistune boards.

cheers for that, would kinda prefer something on the western side , but will keep them in mind

20 hours ago, oxford1327 said:

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...