Jump to content
SAU Community

looking for reliable Nistune installer and tuner

oxford1327
 Share

Recommended Posts

oxford1327 Experienced

oxford1327

Posted
Posted

hello all, I have done a bit of searching and am yet to find the answers I seek, I am wanting to get the Nistune upgrade done as soon as possible, to go with the new high flow hyper gear and injectors etc that will be getting installed very shortly, yet I seem to be having issues in finding a reliable installer and tuner that will respond, I've heard many good things about a certain tuner on the eastern side of Melbourne but after 4 attempts at contacting them to see when I'd be able to make a booking etc I have given up and am seeking recommendations, even after I sent them at their request the list of mods that are currently done, as well as what is about to be done to the car, still only got crickets from their end.....I am from Ballarat about 1 1/2 hours drive West from Melbournistan, and don't mind travelling for the right shop .

car is a series 2 RS4 tiptronic auto Stagea, so come on peoples hit me up with some recommendations

  • Like 1
emts Grand Master

emts

Posted
Posted

If the eastern suburbs one is not Chequered Tuning then try them as they have great feedback from most people on these forums.

If they are then that's also why they are so busy ;)

 

I personally used Chasers Motorsport in West Melbourne. (would make it a bit easier for you to get to as well) was very happy with the work they did (plus lots more I have had them do)

http://www.chasers.com.au/tuning/

 

oxford1327 Experienced

oxford1327

Posted
  • Author
Posted
3 hours ago, emts said:

If the eastern suburbs one is not Chequered Tuning then try them as they have great feedback from most people on these forums.

If they are then that's also why they are so busy ;)

 

I personally used Chasers Motorsport in West Melbourne. (would make it a bit easier for you to get to as well) was very happy with the work they did (plus lots more I have had them do)

http://www.chasers.com.au/tuning/

 

okey dokey, thanks for that I will give them a call and see what they can offer me 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • Kapr
      Freddy Plenum vs Genuine options RB25

      By Kapr · Posted

      @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Holy shit... wow!!! I totally missed this
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...