Jump to content
SAU Community

Recommended Posts

Hi All,

I'm hoping some of you can answer my non car related electrical questions.

I have a large fish tank which needs power to some components 24/7. I've thrown around the idea of buying a generator in the past but the need to be on my property when power goes out threw that out the window.

Now I'm thinking about a battery and trickle charger with an inverter in an attempt to ensure uninterrupted power for my pumps.

So, in my head, I'm thinking this;

3 pumps in my tank that I need to run are about 200w total (thats about 60w bigger than actual, but I'd like to over estimate than under.)

A 50AH deep cycle battery will run these pumps quite easily for 24hrs.

A 300w inverter will allow 240v access to the batter.

A good ol' trickle/maintenance charger will keep the battery charged. 

Power outage means that the fully charged battery will take over.

Is that sane? Am I missing anything? It seems too easy.

I guess the only thing I am really wondering about is maintaining the health of a battery when it is charged at 100% for 99% of the year. Should I make it work every month? Switch off the mains to it to force it to cycle? 

Would love any help.

Thanks,

Christian

 

What you're talking about is effectively a UPS - which you could look at instead of a cobbled together bunch of bits.

The other thing you could do is work out if the tank can run for a length of time only say, only 1 of the pumps.  So when you have the rare power failure that you're protecting against, would the single pump keep it going for 3 hours?  12 hours?  2 days?  By rationalising how much stuff you need to keep going for a (short) time, you can either use a smaller power setup or get more run time for your capacity.

I looked at UPS options but found they were quite prohibitive in cost when trying to run these pumps for up to 24hrs.

So, 200w is what I'd like to run and my calculations have a 50ah deep cycle battery capable of running this for over 24h. That battery is only about $200 and the inverter only another $100. But that seems cheap and I'm worried I'm missing something.

 

The biggest issue is that, as you suspect, you have no charge management in your proposed system at all.  And the thing will always be running both the charger and the inverter, so you will always be using a lot more power (due to all the inefficiencies stacking up) than if you just ran the pumps off the wall.

The next problem is that you seem to have a problem with your expected battery capacity.  If you want to pull 200W off of a 12V battery, then you will be pulling 200/12 = 16.7 Amps.  A 50 Ah battery will only support that sort of power draw for a few hours.  You would actually need a number of batteries that size to support your power requirement for 24 hours.  And that is probably the reason why UPSs look so expensive - because you can bypass the faulty calculation and go straight to their specs.  A typical small UPS can run 200W for only a few minutes.  That's using an 7Ah alarm battery.  If you want to support a typical 200W PC for 6 hours then you're looking at a UPS that will cost a couple of grand and will have at least 8 or maybe 12 of those batteries in it.  And it will be the size of a large PC case.  If you want to run for 24 hours, now you're looking at something the size of a small filing cabinet.  That's also how large a stack of car batteries would need to be.

Can you not have a generator set up to start when the mains power is off (and vice versa)?

Generators are not that expensive:

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5KW-Max-3KW-Rated-Portable-Silent-Camping-Petrol/153040875857?epid=14022448432&hash=item23a1f27151:g:5VAAAOSwwNtbem2v:rk:12:pf:0

The relays to start and stop it should not be that hard (too hard for me but not some electronically able person).

17 hours ago, GTSBoy said:

The biggest issue is that, as you suspect, you have no charge management in your proposed system at all.  And the thing will always be running both the charger and the inverter, so you will always be using a lot more power (due to all the inefficiencies stacking up) than if you just ran the pumps off the wall.

The next problem is that you seem to have a problem with your expected battery capacity.  If you want to pull 200W off of a 12V battery, then you will be pulling 200/12 = 16.7 Amps.  A 50 Ah battery will only support that sort of power draw for a few hours.  You would actually need a number of batteries that size to support your power requirement for 24 hours.  And that is probably the reason why UPSs look so expensive - because you can bypass the faulty calculation and go straight to their specs.  A typical small UPS can run 200W for only a few minutes.  That's using an 7Ah alarm battery.  If you want to support a typical 200W PC for 6 hours then you're looking at a UPS that will cost a couple of grand and will have at least 8 or maybe 12 of those batteries in it.  And it will be the size of a large PC case.  If you want to run for 24 hours, now you're looking at something the size of a small filing cabinet.  That's also how large a stack of car batteries would need to be.

Wow, I totally mis calculated my requirements. Suddenly the cost has blown right out. Thanks for putting me straight, I would have been pissed if I bought everything based off my calculations only to find I had a few mins of power! haha

16 hours ago, KiwiRS4T said:

Can you not have a generator set up to start when the mains power is off (and vice versa)?

Generators are not that expensive:

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5KW-Max-3KW-Rated-Portable-Silent-Camping-Petrol/153040875857?epid=14022448432&hash=item23a1f27151:g:5VAAAOSwwNtbem2v:rk:12:pf:0

The relays to start and stop it should not be that hard (too hard for me but not some electronically able person).

Ok, this does seem like a good option but how on earth do you start a pull-start generator with relays?

Ok sorry,  didn't look too hard at the generator but there are electric start versions about...

Many buildings have emergency generators set up to start automatically in a power outage so the technology must be fairly common. Obviously you only need a small version but the principles should be well understood.

  • Like 1
13 hours ago, KiwiRS4T said:

Ok sorry,  didn't look too hard at the generator but there are electric start versions about...

Many buildings have emergency generators set up to start automatically in a power outage so the technology must be fairly common. Obviously you only need a small version but the principles should be well understood.

Yeah, this guy looks pretty good. I wonder what the range is on the keyring starters! ?

https://www.ebay.com.au/itm/GenTrax-Inverter-Generator-3-5kVA-Remote-Electric-Start-PureSine-Portable-Petrol/292370091074?epid=6007499700&hash=item44129d8c42:rk:1:pf:0

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...