Jump to content
SAU Community

Recommended Posts

Hi Guys,

Doing a bit of a garage clean out and have a few things for sale.

Will probably add stuff as i go along and find more, but here is what i have at the moment:

 

Bosch Motorsport top feed 1000cc injectors. Used only for 5000kms with 98  $500

R32 GTR OEM BOV return pipe (used)  $150

R32 GTR OEM front sway bar (used)  $100

R32 GTR OEM aircon ducting (used). Every bit of plastic ducting from under the carpet and dash, except the one that goes to the drivers side vent  $50

R32 GTR OEM Twin Turbo pipe (used)  $100

R32 GTR OEM coil packs (used) $50

Ruzic II 4WD controller (used) $500

R32 carbon boot lid with carbon N1 lip and genuine R35 GTR badge. Boot lid has crazing all through the clear/resin, N1 lip is perfect, so is the badge. $500

R32 GTR series 2 textured center console surround in mint condition with lighter (used) $500

R32 GTR series 2 textured center console surround with a crack at the very bottom next to gear boot, and one broken tab at the very top $100

Sparco Sprint V fixed back seats. Pair, no rails. Very little use, some marks from storage but no tears. $500

 

Open to offers within reason.

Items are located just south of Wollongong.

Willing to post smaller items at buyers expense, larger items like ducting, seats and boot lid prefer pick up.

There will be more to come as I get through everything.

I will upload pics when I get a chance.

Link to comment
https://www.sau.com.au/forums/topic/476257-gtr-bits-and-pieces/
Share on other sites

Also have:

Haltech I/O 12 Channel Box A only, no lead (used) $300

Haltech Can Hub Mini with 2 cables (used) $100

Haltech O2 sensor with new weld on bung, still in good condition (used) $100

R32 GTR OEM map sensor (used) $50

R32 GTR OEM Alternator (used) $100

R32 GTR OES CAS Bracket (used) $50

7 hours ago, horus83 said:

Hi Mate, 

Do you still have the 

Center console surround, Can you send me a pic?

 

I still have both. Which one were you after, the mint or cracked one?

16 hours ago, horus83 said:

If you can PM both ill decide which one? I am assuming it is the grey texture finish ones?

Yes they are both the series 2 grey textured finish ones. PM sent.

Some pics.

Ducting, Sway bar, oem map sensor, Haltech O2 sensor, Haltech I/O Expander Box A, oem cas bracket, Haltech Can Hub Mini, Injectors, Ruzic II 4WD Controller, Mint series 2 textured stereo/shifter surround.

More to come.

20130707_150149.jpg

20130707_151959.jpg

53570985_403763456835583_3278011081456353280_n.jpg

53846715_261526194778397_4076207762458017792_n.jpg

53889046_326232208251509_7104461655223828480_n.jpg

54190702_318975015486010_4799588565589688320_n.jpg

54255016_2110808939001413_7434246209331527680_n.jpg

54428409_2537318289616251_8989685026647965696_n.jpg

54433166_2313535578686282_6420320025495732224_n.jpg

55564269_270211360579297_7215893151494438912_n.jpg

console 1.jpg

console 2.jpg

console 3.jpg

console 4.jpg

console 5.jpg

  • 3 weeks later...
  • 1 month later...
1 minute ago, theskidmasta said:

i know you prefer pick up,  but if you can calculate shipping to socal usa i can take the boot lid off of your hands

With the size of this thing shipping it to the states would not be worth while.

You would be better off sourcing one locally.

1 minute ago, theskidmasta said:

i cant find a decent one in the US for less than 1k AUD

 

Well JACKA87 is supposed to be picking it up this friday.

If he doesn't pick it up, I'll look into the shipping costs, but i know it wont be cheap and the total cost will be up around that 1k figure im pretty sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...