Jump to content
SAU Community

Recommended Posts

Hey boys and girls, so stupid thing to be saying but I only just noticed I’m missing a belt, which is it, why does my car still run without it, it’s in the pic.

is there a pulley kit to replace the things the belts run on?

my headlights have what bulbs to use, I’m assuming I can just buy the ones at super cheap nothing has to be special about them, they will fit?

when I go from park to reverse or into auto there is a shift in my car and sometimes a cluck, i saw on chrisfix that it might be the uni joints, can I replace those without replacing the whole ?tail shaft?

and lastly someone before me has use like a liquid glue to stick the side skirt on, looks like polyurethane maybe, any ideas to get this off?

7FC4DBEB-E07F-41B6-B404-EA6D19E88A07.jpeg

49094D6E-D911-4876-BA77-4B03E10DEB12.jpeg

4D437542-AAC9-4762-BEFD-87785D771F15.jpeg

48 minutes ago, GTSBoy said:

Ever wondered why your air-con doesn't work?

And no, you cannot service your tailshaft yourself. Take it to a mechanic, or a drive specialist like Hardie-Spicer.

Ahah yes I have, as I thought it might of been that.

alright thanks I’ll do that then

1 hour ago, niZmO_Man said:

if you see the markings above the yellow sticker, it says D2R 35W

I don't think Supercheap stock them, but you can check.

Or get two of these

https://www.powerbulbs.com/au/product/osram-xenarc-d2r-single

Yea I saw those, just wasn’t sure if there was a difference to those then the modern ones

6 hours ago, GTSBoy said:

Ever wondered why your air-con doesn't work?

And no, you cannot service your tailshaft yourself. Take it to a mechanic, or a drive specialist like Hardie-Spicer.

 

5 hours ago, Crepsley said:

Ahah yes I have, as I thought it might of been that.

alright thanks I’ll do that then

lol

the funny thing is, someone went to the trouble of putting it on and tensioning it.  Perhaps it did actually work (a little, at first)

You just need the right belt and that will be sorted, the globes, yes just buy some D2Rs (more recent ones are compatible so no issue there)

Re the clunk....best to get a mechanic to look at it. There are about a million (OK, 10) places between the transmission and the tyre that could clunk, no point just guess it is a tailshaft.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...