Jump to content
SAU Community

Recommended Posts

Hey guys I’ve currently got a rb30 and I’m gonna boost it, my build plans are

haltech ps2000

highmount with external gate 45mm

na bottom end 

turbo oil pump 

have 660cc injectors night go higher like 1500cc

new timing belt and water pump seals (service shit)

arp headstuds 

Mls headgasket 

wade cam (can’t remeber which one) 

head to be clean and polished pep pro racing valves new steams and heavy duty vavle springs

intank walbro 460 runing to a surge tank with twin 044s 

Got a 3inch dump pipe 

I’m aiming for 300rw kw 

For my turbo choice is where I’m stuck I currently have a gtx3076 0.82r and a gt3540 off a xr6 turbo. 

Which turbo will get me to 300 with my engine build, will the 3076 make it or will I have to go the 35? 

And what kind of safe boost level would I see with the na bottom end on 98 and e85?

 

Link to comment
https://www.sau.com.au/forums/topic/478613-rb30-turbo-choice/
Share on other sites

1 hour ago, Joel0201 said:

intank walbro 460 runing to a surge tank with twin 044s 

Why would you do that? Just use the walbro.

 

 

3076 will do it, but 3540 makes more sense, especially considering you already have it.

300Rwkw is a very conservative figure although it will make for a rapid car. But you won't need half of that gear. Stock manifolds and valves will do it. I would say use the 3076 but you might get bored with 300kw so may as well put the 3540 on. Safe boost level depends on the care with which the engine is put together and the tune but it will be at least twice what you need to make 300kw.

I already have both turbos,

the surge tank it due to the shitty design of holdens fuel tanks (in the vl) I don’t want to risk detention when cornering. 

I have been leaning towards the 3540. 

A lot of the mods are for future proofing the car, I’m restoring it so the fuel tanks out and the intake is off so I figure I don’t ever wanna change shit twice. 

Everything ive listed I already have of another build Hahahah so I’m pretty well kitted at my house for rb30s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...