Jump to content
SAU Community

Recommended Posts

Howz it going guys,

I just brought my self an R33 and i live in Melbourne. My skyline has a BOV on it and i want to keep it on there, besides it sounding good it's also good for the turbo as we all know. Does anyone know if it's possible to keep the blow off valve on the car and keep it legal.

Thanx Matt.

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/
Share on other sites

Howz it going guys,

I just brought my self an R33 and i live in Melbourne. My skyline has a BOV on it and i want to keep it on there, besides it sounding good it's also good for the turbo as we all know. Does anyone know if it's possible to keep the blow off valve on the car and keep it legal.

Thanx Matt.

Only if its not venting to atmosphere and plumbed back in like the standard unit as far as I know. Then you loose the sound, so might as well have the stock unit and no problems.

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-966899
Share on other sites

Thanx guys so there is no way not even if i get an engineers certificate to say that the car requires one or that it is fitted as to his specification does anyone know if thats possible. i wanna try cover all areas to get around this one and im sure others have done this process and know the facts.

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967000
Share on other sites

just quickly about BOV's, i have seen some BOV welded on the intake pipe. is that still illegal?

If its on the intake pipe.. before it hits the turbo, its not really "bad" air so to speak... at that point i would have though.. so it should technically be legal..

correct me if i am wrong guys.. still a noob :cheers:

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967009
Share on other sites

so there is no way not even if i get an engineers certificate to say that the car requires one or that it is fitted as to his specification does anyone know if thats possible.

You can't get a BOV engineered (unless it's a plumb back)

You can't get a certificate to say the car "needs one"... because it doesn't.

just quickly about BOV's, i have seen some BOV welded on the intake pipe. is that still illegal?

uh.... are you sure you aren't talking about air flow meters?

I don't know why anyone would put a BOV on the intake, it wouldn't do anything.

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967033
Share on other sites

Is there any mechanical benefit on welding the BOV onto the intake as it's not getting rid of any excess air from the turbo or is it? And will it still cause a big and hard working turbo to stall on deceleration???

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967358
Share on other sites

I have a HKS SSQV and the standard R34 BOV. I leave the HKS BOV off most of the time as it attracts too much attention and is just asking for a defect notice.

If the car comes factory fitted with a BOV then it is LEGAL. My car went through ADR37 compliance like every other import vehicle, and all factory fitted items are noted as compliant. The fact that the factory R34 BOV makes a wooshh sound makes no difference, it is a factory fitted item and my compliance plate says it passes as compliant so the cops or EPA cant do sh!t about it :)

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967458
Share on other sites

Only if its not venting to atmosphere and plumbed back in like the standard unit as far as I know. Then you loose the sound, so might as well have the stock unit and no problems.

Aftermarket BOV with plumb back will still make noise, well mine does any way (GReddy). From my experiance if you run high boost like mine does (1.5 bar), then an aftermarket one is needed (my stock one starts leaking for some reason).

My 2 cents worth.

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967597
Share on other sites

the stock bov with a pod filter is pretty loud, just like a normal blow off valve, i dont see the need for an aftermarket bov unless you run a crapload of manifold pressure from heaps of boost aka 20psi ++

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-967774
Share on other sites

 The fact that the factory R34 BOV makes a wooshh sound makes no difference,

does the factory BOV make a venting to atmo sound??? I wasn't aware of that. Still haven't got my R34 so i don't know :rofl: never driven one either :D

Link to comment
https://www.sau.com.au/forums/topic/47963-blow-off-valves/#findComment-968123
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...