Jump to content
SAU Community

Recommended Posts

Hello everyone. So I installed my Hicas delete kit.(picture below). After install,  i had my alignment done. The bushings are the ones I installed that came with it. Now when I drive and shifting through gears, i feel my rear end wanting to fish tail a little. Is this normal? I'm driving an r33 gtst. Just want to know so I don't take her back to garage to get them to look it over again. 

15850554916634866986402043585056.jpg

Link to comment
https://www.sau.com.au/forums/topic/480021-hicas-delete-question/
Share on other sites

2 hours ago, Murray_Calavera said:

If it's all bolted up properly and the alignment is good, just keep driving it. You'll get used to the changes with more seat time. 

Oh ok. My daily is an S2000 and it doesn't feel like that at all. 

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

On 3/24/2020 at 5:28 PM, GTSBoy said:

What is the rear toe after the alignment?

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

38 minutes ago, MoMnDadGTR said:

I’ve heard this before after hicas removal, check your bolts and what not make sure everything is right. drive it for a bit if you can’t stand It try a different alignment or find a gtr lol. Just kidding should be fine alignment may just not suit your driving style.

Ok. I do have a warranty on the alignment. If I were to take her back to redo the alignment, is there a rear setting I should be shooting for or just make sure she is in the green?

2 minutes ago, Aphonechanh said:

I really have no idea. I have a 6 month warranty in the alignment. If I were to take her back, is there a number I should be shooting for her? All I know is that it is in the green. 

Toe out would be way twitchy. Zero toe should be very easy to disturb. Toe in should be more stable.

Be aware that static toe, as measured on the rack, may completely change when the vehicle is moving, particularly if you have stuffed bushes in any of the arms.

You should have got a sheet with your alignment telling you your numbers...I got a feeling your alignment is not wrong just not set up the way you want it. I know when we get alignments done around here you can see the whole review of what they did and your final numbers. 

Do this for the rear, if you want some stability.

  • -1 degree camber (these things camber in hard when they squat)
  • 1mm toe in each side (2mm total toe in, on squat these shit boxes toe out)

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...