Jump to content
SAU Community

Stagea ECU upgrade

Stick180

By Stick180,
in Engines & Forced Induction

 Share

Recommended Posts

Stick180 Enthusiast

Stick180

Posted
Posted

Hello chaps, 

Im chasing some opinions. I have a 2000 Series 2 Stagea RS (Factory auto, Manual conversion), Currently running Nistune with flex sensor, making 332rwkw. The time has come to look at aftermarket ECU options, as i feel like i've reached the limit of what Nistune has to offer (could also be the fact that my tuner isn't really interested as he didn't build the car), and also to ditch the auto ECU. Now, i know most of you will tell me to buy what your tuner suggests, but i've ditched my current tuner, and now on the lookout for a new one, and the other good local options all offer tuning on the big brands.

I've been tossing up between the Link GT-T plug in or the Haltech Elite 2000 with harness adapter. My main requirements are Flex fuel, Boost control, Wideband control, Launch control, mafless, EGT monitoring and engine safety control. ECUmaster Black has also crossed my mind, but i don't see much local support.

Does anyone have opinions on the these 2 ECUs? If they are suitable? Other suggestions? all comments appreciated.

Link to comment
https://www.sau.com.au/forums/topic/480079-stagea-ecu-upgrade/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Well  I put a Link in my Stagea but apart from the usual functions I just used it for boost control although I believe it is capable of the other tasks that you require. .. but I believe top of the line Haltech will also do what you want.

Stick180 Enthusiast

Stick180

Posted
  • Author
Posted
40 minutes ago, KiwiRS4T said:

Well  I put a Link in my Stagea but apart from the usual functions I just used it for boost control although I believe it is capable of the other tasks that you require. .. but I believe top of the line Haltech will also do what you want.

Was yours an factory auto or manual?

28 minutes ago, GTSBoy said:

Yuh, they will both do the job (although I'm not speaking for the Haltech 2000 specifically. You might or might not need a different model).

But what is your plan for a TCU?

When you say TCU, do you mean Transmission Control Unit?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
1 hour ago, Stick180 said:

Was yours an factory auto or manual?

When you say TCU, do you mean Transmission Control Unit?

Mine was a factory auto but converted with GTR gearbox and rear end (I think GTSBoy missed the bit where you had converted to manual).

Stick180 Enthusiast

Stick180

Posted
  • Author
Posted
28 minutes ago, GTSBoy said:

Ohhh. I only read "to ditch the auto ECU" and being part of the plan.

Ahh. Well, the TCU is part of the reason i want to ditch Nistune. Even with all the auto stuff turned off, i still get TCU/TCM error codes popping up from time to time. 

2 hours ago, KiwiRS4T said:

Mine was a factory auto but converted with GTR gearbox and rear end (I think GTSBoy missed the bit where you had converted to manual).

Which link did you end up going with? a plug in or wire in?

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

Go the link. Easy to use and setup, help file is a lot better than haltech, use any sensor with its own calibration, closed loop boost and Wideband, upto 5d mapping, ethrottle if you want to enable other features like traction & cruise control and don't have to eat kebabs every time you drive the car. 

  • Haha 1
Stick180 Enthusiast

Stick180

Posted
  • Author
Posted
On 03/04/2020 at 10:38 PM, robbo_rb180 said:

Go the link. Easy to use and setup, help file is a lot better than haltech, use any sensor with its own calibration, closed loop boost and Wideband, upto 5d mapping, ethrottle if you want to enable other features like traction & cruise control and don't have to eat kebabs every time you drive the car. 

Im leaning towards the Link. They've release the G4X range of plug ins now too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...