Jump to content
SAU Community

Any venue to test veichle speed and stability?

shadow85

By shadow85,
in General Automotive Discussion

 Share

Recommended Posts

shadow85 Contributor

shadow85

Posted
Posted

Does anyone know if there is a place in Adelaide that we can hire out to legally test our veichle at high speed in a straight line. Just want to do some testing and diagnosing on the car.

 

I was thinking a small airport may allow it? I have heard of in the past that Regency would get you to hire out such a place for vehicle stability testing and brake testing. I am unsure where that is and if the public can hire it for their own pruposes.

 

GTSBoy Grand Master

GTSBoy

Posted
Posted

You could enquire about either Mallala or The Bend. Hiring the whole facility just to use the straight for some testing would probably be horrifically expensive. But you may be able to work in with someone else who is hiring the track, either for engineering/testing purposes of their own, or a club track day where you could arrange to have the straight at lunchtime, say.

shadow85 Contributor

shadow85

Posted
  • Author
Posted (edited)
6 hours ago, GTSBoy said:

You could enquire about either Mallala or The Bend. Hiring the whole facility just to use the straight for some testing would probably be horrifically expensive. But you may be able to work in with someone else who is hiring the track, either for engineering/testing purposes of their own, or a club track day where you could arrange to have the straight at lunchtime, say.

Yea it looks like my best bet is going to be just doing it at a track day or something.

 

No way I would want to privately hire a straight part of the bend, just any track day tickets alone cost an arm and a leg lol

 

2 hours ago, admS15 said:

Or you could just use a private road somewhere in Mexico like the rest of us. Shh, i didn't just say that.

Haha, I may or may not have done this several times already ;) lol

 

But, yeah i need a large road because I am testing my cars launching stability issues, its been sending me violently sideways, so its a bit dangerous to do on the streets. The reason why i prefer to go somewhere more suited like a track or something, but was hoping it was more private then a track day with many other people.

Edited by shadow85

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Intercooler Choice

      By Dose Pipe Sutututu · Posted

      Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
    • GTSBoy
      RB26 swapped gtst

      By GTSBoy · Posted

      So.....wire it up appropriately. You can't use the resister pack with those injectors anyway.
    • r33.antwone
      RB26 swapped gtst

      By r33.antwone · Posted

      that’s the thing i’m on ID1050s and haltech not getting power due to the injector resistor 
    • Toilet Goblin
      Intercooler Choice

      By Toilet Goblin · Posted

      ahh okay cheers, i was thinking of just going for the m073, think m079 would be way too overkill considering they are same size. 
    • GTSBoy
      HK Premier with plans for slight mods, but keeping clean and simple

      By GTSBoy · Posted

      My first car was a HG. I'm very familiar with them. A mild cam upgrade is a good idea. The 186 is a very flexible engine - meaning it has good torque from down low. You can give up a little torque down low for quite a lot more excitement in the mid range, and a bit more up top - but they are not exactly a rev monster. You need to upgrade valve springs at the minimum. For a bigger cam, you'd want to make sure it wasn't still running the original fibre cam gear. That would be unlikely, given that most of them shat themselves in the 70s and 80s, but still within the realms of possibility. Metal cam gear required. Carbies are a huge issue. The classic upgrade was always a Holley 350, which works, but is usually pretty bad for fuel consumption. The 186S had a 2 barrel Stromberg on it that was very similar to the one on the 253, and is a reasonable thing if you can find one, and find someone to help you get it set up (which is the same issue with setting up a 350 to work nice). The more classic upgrade was twin sidedraught CD type carbs, or triples of same, or triple Webers. The XU-1 triple Webers being the best example. You can still buy all this stuff new, I think, but it's a lot of coin to drop. And then the people able to set them up are getting fewer and further in between. There's still some, but it used to be everyone's** dad and uncle could do it. **Not everyone's! But a lot. All in all, I wouldn't get too carried away with the engine. Anything you do to it without a full rebuild for power and revs will only make it slightly faster. I am all in favour of a complete teardown rebuild, with nice rods and pistons, 10 or 10.5:1 compression, and a clean port job with at least a big enough cam to run 98 with that compression, if not bigger. And if I did that to a dirty old red motor, I'd want to inject it too, which I'd struggle to fight against the devil on my shoulder that would argue for ITBs and trumpets. But the bills would start to mount up, and it will still never make stupid power. OK, a few people still know how to build absolutely mental red motors, courtesy of the work that went into HQ racing and modern knowledge being applied. But even a 300HP red motor is no match for an RB20 with a TD06. So you have to decide what it's worth to you. I'd just put a set of 6>2>1 extractors, a 2.5" exhaust and an electronic ignition conversion/dizzy on it and just run the old girl like the fairly slow old girl that she really is.
×
×
  • Create New...