Jump to content
SAU Community

Recommended Posts

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

wtf is an ork van :confused:

:P

The Bride rails bolt straight into a R32-R34 skyline. From there, the OBX seats bolt onto the top of the rails. The rails have 4 holes, but depending on which OBX seat you choose you may have to drill 2 holes in the rail. They are $295ea from Powerplay.

A cheaper option may be to start with generic style rails from somwhere like race and rally, but if you go that way you will need someone to help you mount the rails to the car. Mounting the seat to the generic rails is the same, 2 holes are OK, 2 you may need to drill.

Hope that helps :D, its pretty sad when the rails cost more than the seats ;) They are still a pretty good deal compared to the $1k + people ask for used Bride seats.....

yeah, thanks Nissan for creating the world's most uneven floorplan....you will definately need at least some custom fabrication if you go generic rails, both for the uneven floor and for the seat belt mount on the drivers side.

The Bride rails or a copy are the easiest option :(

yeah Powerplay have them in stock at $295 which I got the impression was pretty cheap. Its a shame you can't get them made up cheaper :)

  • 3 months later...

well....that very much depends on which ones you go for....

If you take a deep fixed bucket one like the Forza, they are a real pain in the arse to live with....don't buy something like these for a daily driver unless you really know you want them. On the other hand they are superb at holding you in place :P

On the other hand the reclining ones are more open and wider. So, they don't hold you as tightly but they are much easier to live with :D

  • 5 months later...

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

just measured my hips from point to point with a ruler here at work. about 55 centimetres. man i need a wide seat. duncan when are we gonna meet up next? i gotta try out your seat.

cheers, MARK

Hey Duncan, is Mark saying you got a fat arse mate?.....LOL

Ian

haha he is probably right to...for me I looked at the regular/narrow seats and just laughed :P

Anyway, Mark come out to the UAS day I will have the race car there, I have the forzas in it which are the same width.

midnight, unfortunately I can't get further photos than what are on the site....we don't carry any stock to take pics of, thats how we can do them so cheap :D The Forza in blue/black are mostly blue with black highlights (like the yellow/black on the pics).

I did come across some OBX seats at Autobarn, so you might find them there.....just don't pay their prices ;)

Hey negative.....rails are the biggest problem with aftermarket seats :P

The easiest way I've found is getting a set of the Bride rails, they bolt straight in and the OBX seats bolt straight to them.

  • 2 weeks later...

Hey mate the seat you tried was a Forza, which is the same width (410mm) as the daytona wide. Unfortunately that is as big as they make the fixed back seats.

If it was too tight there are always the recliners, they still have pretty good support but are roomier for the ample gentleman :D

OBX are great seats, these are awesome value, i have two black monaco seats in my 4dr 32 and they are great for all day driving and track use, and best of all they are on the standard r32 rails and are comfortable for the everyday driving. Good luck with the group buy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...