Jump to content
SAU Community

Recommended Posts

I checked my atf fluid for my ej20 automatic transmission it seems fine though looks orangish on the paper more yellowish on the dipstick if i remember correctly. No idea the last time it was serviced.

I also had a side question:

1) I notice when i put my car in drive and if i put my foot on the gas straight away it rough shifts, hard to explain but it's like the car hasn't put it self into first gear yet and I'm rushing it into first gear. 

2)When I shift gears it shifts fine no problem I just might be imagining things but it seems I feel like when it does shift that the car bumps backwards like im getting pushed back if that makes any sense.

These 2 questions the car has always been like that since I bought it, either it's normal or I've been careful not to make it worse if it is a problem lol.

atf.jpg

Link to comment
https://www.sau.com.au/forums/topic/481014-is-it-time-to-change-my-atf/
Share on other sites

1 hour ago, silviaz said:

I change the oil and filter every 5000km. Or you referring to something within the transmission

Yeap, trans oil and filter.

Post up model and year mate

  • Like 1
10 hours ago, silviaz said:

2001 impreza ej20. automatic.

Cheap

This "should" be the filter and gasket, you need to check p/n https://www.ebay.com.au/p/18017006797 

Find a youtube for what you need to do when filling, you basically refill the transmission, run the car and select each gear a few times, tgen recheck the level.

Rinse and repeat.

With some stands and basic tools it shouldn't take more than an hour.

You probably don't need a full flush, but if you do they are more involved.

Enjoy

A dry fill requires 8.6ltrs of fluid.

If you only drain the pan and replace the filter you won't need that much.

http://www.penriteoil.com.au/product-selector#/recommendations

I would personally just get a 4.5ltr bottle and see where that gets me, if I needed more I would just take the bike or Mrs car to get any extra that I needed.

Don't spill the oil oil, it stains like 10 staining things.

4 hours ago, mlr said:

A dry fill requires 8.6ltrs of fluid.

If you only drain the pan and replace the filter you won't need that much.

http://www.penriteoil.com.au/product-selector#/recommendations

I would personally just get a 4.5ltr bottle and see where that gets me, if I needed more I would just take the bike or Mrs car to get any extra that I needed.

Don't spill the oil oil, it stains like 10 staining things.

Here was what teh person at the shop gave me they weren't even completely sure lol. So hard to find for this model what it takes i have no idea why.

20200829_135359.jpg

20200829_135429.jpg

4 hours ago, silviaz said:

apparently there is an external filter aswell? according to my research their isn't so I'm confused.

External filter is for the high torque box, the WRX, and 3.0 LOLberty use the high torque boxes.

Others to maybe, meh, stick it up on stands and have a look.

https://en.wikipedia.org/wiki/List_of_Subaru_transmissions

On 8/29/2020 at 6:53 PM, mlr said:

External filter is for the high torque box, the WRX, and 3.0 LOLberty use the high torque boxes.

Others to maybe, meh, stick it up on stands and have a look.

https://en.wikipedia.org/wiki/List_of_Subaru_transmissions

Hey mate do you know how much I have to torque the bolts inside the pan and outside the pan? I can't find a manual for this car anywhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...