Jump to content
SAU Community

Recommended Posts

 

Hi, so my series 1 r33 GTST's AC decided to die in California's hot summer. I've been finding replacement parts and its been a nightmare. I've been thinking of rebuilding the ac but I heard its pretty expensive and It's hard to find a place here in san Francisco. Does anyone here have experiences or alternative to fixing the compressor?

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

On 21/07/2021 at 1:37 AM, White GTS-T said:

Hey,

Sorry to hear, I'm not trying to be a dick, but do you know that it is a compressor failure, or are you just speculating because your A/C isn't working?

Well, the clutch is apparently not engaging at all and has a huge gap, it also does have an activating click when turning on the ac. But regardless the compressor needs to be changed anyways

On 21/07/2021 at 1:47 AM, Duncan said:

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

Yahoo auction is actually a pretty good idea. do you know if stagea's compressor will fit the gtst? 

Edited by Honeyboost

Possibly...there were differences across R33 air cons and I'm not sure what they were. Late R33 and Stagea are *apparently* the same.

The mounting is the same, the wiring is either the same or interchangeable (1 wire) but the fittings to the car can vary.  I'm sure others know better than me.

You can confirm the exact part# using your VIN through FAST or parts websites.

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

  • Like 2
On 21/07/2021 at 4:53 PM, GTSBoy said:

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

you're right, I might've not looked hard enough, I will do that this weekend when i'm free of work

It is possible the clutch isn't engaging because the air gap is too big. The clutch air gap is adjustable. The clutch air gap is determined by a stack of shims of varying thickness. You can change the air gap by changing/removing shims. You also need to be sure the clutch coil magnet is getting 12 volts when you turn your A/C on. And you need to put a set of manifold gauges on the system to see what it is doing. If the gauges indicate the static pressure in the system is okay, and you are getting 12 volts to the compressor and the clutch air gap is within specification, then and only then can you rule out the compressor while watching the gauges. Hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...