Jump to content
SAU Community

Recommended Posts

 

Hi, so my series 1 r33 GTST's AC decided to die in California's hot summer. I've been finding replacement parts and its been a nightmare. I've been thinking of rebuilding the ac but I heard its pretty expensive and It's hard to find a place here in san Francisco. Does anyone here have experiences or alternative to fixing the compressor?

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

On 21/07/2021 at 1:37 AM, White GTS-T said:

Hey,

Sorry to hear, I'm not trying to be a dick, but do you know that it is a compressor failure, or are you just speculating because your A/C isn't working?

Well, the clutch is apparently not engaging at all and has a huge gap, it also does have an activating click when turning on the ac. But regardless the compressor needs to be changed anyways

On 21/07/2021 at 1:47 AM, Duncan said:

I recently went through this with my w34 stagea and was unable to find new genuine or aftermarket options. I ended up taking a punt and buying 2 used ones off yahoo japan, and the first one I fit worked so I have a suspect spare.

I suspect AC compressors are going to become one of those impossible to find parts over the next few years until someone works out a non genuine alternative including mounting

Yahoo auction is actually a pretty good idea. do you know if stagea's compressor will fit the gtst? 

Edited by Honeyboost

Possibly...there were differences across R33 air cons and I'm not sure what they were. Late R33 and Stagea are *apparently* the same.

The mounting is the same, the wiring is either the same or interchangeable (1 wire) but the fittings to the car can vary.  I'm sure others know better than me.

You can confirm the exact part# using your VIN through FAST or parts websites.

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

  • Like 2
On 21/07/2021 at 4:53 PM, GTSBoy said:

Clutch <> compressor. Compressor could be fine. Probably is. The compressor and clutch are going to be common with other cars. Take it to an auto electrician, particularly one who also does air-con regassing etc.

And how can it be hard to find someone is San Fransisco to rebuild a compressor? I live in a backward city in a backward country where we all hang upside down from the ground, with a population of only a million or so people and I can probably come up with a list of 5 or 6 places that I would be able to get an air con compressor done. You have SF (pop 1M, LA (pop ~4M), the rest of California (~40M), every other city on the west coast, every city everywhere else in a country with 300 million people.

you're right, I might've not looked hard enough, I will do that this weekend when i'm free of work

It is possible the clutch isn't engaging because the air gap is too big. The clutch air gap is adjustable. The clutch air gap is determined by a stack of shims of varying thickness. You can change the air gap by changing/removing shims. You also need to be sure the clutch coil magnet is getting 12 volts when you turn your A/C on. And you need to put a set of manifold gauges on the system to see what it is doing. If the gauges indicate the static pressure in the system is okay, and you are getting 12 volts to the compressor and the clutch air gap is within specification, then and only then can you rule out the compressor while watching the gauges. Hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...