Jump to content
SAU Community

Recommended Posts

Hi,

Finally i have the car running good with no problems(not counting bodywork) and i have the question about custom exhaust.

I rly like this sound: 


I know i know it is a GT-R and i have very poor RB20DE NEO with stock exhaust.

I know i cant get 100% same sound other than i buy "his" car or build the same exhaust. He has some midori/mines titanium downpipe...sard cat. and that midori hi power silent exhaust(titanium)..that is just for the info.

What i "want" is the similiar deep "silent" tone. I do not want those "3 inch" screamers which i can find all on YT.
So my Q. What type of custom exhaust should i go to have something similiar? Deep but nice and quiet sound?
Is it even possible on N/A engine?

Link to comment
https://www.sau.com.au/forums/topic/484387-custom-exhaust-sound/
Share on other sites

For a 2L six making just over 130HP, all you will need is a 2.25"-2.5" steel system with a medium sized resonator in the middle and a large muffler in the rear. Going any larger will make it into a drony mess.

But.....getting a really nice tone out of it will likely require experimentation with different size (and possibly make) resonators and the same again with the muffler. I would take a first guess at a long hot dog or centre-offset muffler in the middle and maybe a large X-Force can at the rear.

  • Like 1

The real challenge is, what does that car even sound like in person? Who knows. 

Its a video, its a very simple process to just go.... yeahh and another couple of db over the 0 to 40 hz range.... yep perfect. 

I don't know where you're located, but I'd advise to go to car meets with people that have the same car/engine as you. Have a listen to their setup and go from there. 

8 hours ago, PonieBoi said:

Not possible, the way the exhaust gases travel from a stock NA header as opposed to a turbo manifold and rear housing affect the sound massively. Might as well be a different engine.

Could argue it is indeed a different engine...

Thank you for the info guys :-) 
@GTSBoy: Yeah i know i need something smaller and with resonater and bigger muffler. "Funny" thing is that i like the "stock" sound...when the car is on idle and i stand at the back of the car the sound is "deep" and nice but it is too quite and inside you cant hear it at all let alone when you drive.
I will ask the guy at exhaust shop. He has done many exhaust but not on my car/this engine so no exp. there 😕 
EDIT: I have this HKS Hi Power muffler(34002-AK007) got it as a gift(it is not on the car)...in my case that is not gonna be good yeah? 


@Murray_Calavera: i know but in this purpose i just like the sound "from" the video. Maybe in real life i would not like it...but in my case i like "that" sound...something deep and quiet :-)
Sadly the second part is not an option in here. In my country they are very few Skyline and like 99% are GT-Ts. As far as i know iam the only one in the country who has this car with this engine(no wonder...who wants a Skyline from "2F2F" with 155Hp LOL)

I know i cant get that "same" sound...just want something deeper and quiet :-) 
I found one video on YT with the same engine and custom exhaust and it sounded nice...but sadly the video was deleted 😞 

Edited by Kapr
  • 2 weeks later...

HI guys...a little update.
I came to this exhaust https://www.kakimotoracing.co.jp/products/detail_product.cgi?rid=191
Problem is that it is for RB25DE NEO(i have RB20DE NEO).
I tried to ask like 3 shops...but they just...yeah man it is for RB25 we dont know if...

But is the exhaust on RB25 really that different? I try to find any information but no info about stock exhausts on these engines.

Other thing is sound/drone. I know that these N/A RB can drone if you put large exhaust and cannon ball rear muffler.
This exhaust has cannon bal but it has oval resonator too. I manage to find one video.

He says that cat is broken so a little rasp can be heard. I know it is video/quality etc but imho it sound way better than those 3 inch sreamers.

So does anyone know if i can fit this exhaust on RB20DE NEO...imo i dont know why the RB25DE NEO exhaust should be any different...but i dont really know 😄 
 

 

On 03/06/2010 at 1:36 AM, mad082 said:

you have an NA skyline. anything with a big outlet is going to make the car noisier and drone more. that one like you posted from ebay won't be that bad though as it is only the tips that are 3". where it passes through the muffler is still only 2.5" so it won't be that bad, but if the muffler has poor quality packing then it may still sound bad.

a full custom made 2.5" cat back exhaust with a good rear muffler and centre resonator should only set you back about $500 and will give a good note while not being too loud.

as for the cannon with the silencer, yes they cut down the drone, but they do also look stupid with the silencer in them. just get a good quality 2.5" oval muffler and then find a nice tip for it (and not one of those ones from supercheap, etc that are held on by a screw/clamp).

Or i can do this ...i think maybe this would be the best option for the sound and to ensure that exhaust will fit :) That Kakimoto is quite large 80-90mm ...
(sry cant edit anymore)

Edited by Kapr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...