Jump to content
SAU Community

Recommended Posts

Haven't done much with, or driven, the R33 lately as I have been busy working on another car, Project X...no wait, Operation White Thunder...yes that's better.

Couple of weeks back though, taking the 33 out of the driveway (it's not steep, fairly shallow and mostly flat) when I hear a crack turning left. Then found the car was jammed, not reversing or forward-ing..looked and found front passenger wheel sitting on an angle I would describe as, not right at all. Turns out it was a broken toe-arm mount on the knuckle. Fk knows how it broke, as I hadn't hit anything, but I'm guessing might have been too much caster, being lowered, using roll centre balljoint and tie-rod joint, that might have been causing binding and stress over time. It was a hell-mission to get it back into the driveway and into the garage though I can say.

Any other thoughts on why this would break are welcome, cos it's a pretty thick heavy duty bit of cast-ness, not something to just snap on a whim.

20230312_110153.thumb.jpg.d6abba85f239a79cade3df551b314f8b.jpg20230312_110220.thumb.jpg.58f2b4fe1d4f288c9f5095ab1692d9f1.jpg

The welding is from me trying to do a temp fix on it, but that lasted about 3 metres, broke at first turn.

Couldn't find a 2nd knuckle, so bought the GK Tech knuckle set. First thing, they are LIGHT. Weighed in at 3.7kg, vs nearly 6kg for an OEM knuckle. Some pics

20230312_110619.thumb.jpg.91600e67dce43eec0673f516d83c2eb0.jpg20230312_110650.thumb.jpg.ac49d1d35400440fa3b479bb85de2617.jpg20230312_111202.thumb.jpg.7d3adfa86b1a6d2c4951d71cad214eae.jpg20230312_111208.thumb.jpg.4c0b3b2c04ad92a6c21fe18f2201a777.jpg20230312_111210.thumb.jpg.82597e0cecc5db1d8363e56cea44ca0c.jpg20230312_111233.thumb.jpg.e42dd06125ce8cc1690633ba725423dc.jpg

 

I've fitted the passenger-side knuckle already; fits just fine for the most part. A few things. They drop the car by 20mm, which GKTech say clearly on their website. My Blitz coilovers don't have much lengthen adjustment, so couldn't raise the car, so have dragged an old set of BC's out to get it back to the correct ride height for me, as they have alot more height adjustment. More on that to follow.

The tie-rod mount is much further out, so you MUST use a longer tie rod, which GKTech also clearly note. More on that to follow.

They have wayyy more angle, so much so that I can't turn the wheel much without the rim grinding and sticking on the sway bar ...sorry GTSBoy 😛 anti-roll bar. I have another set of rims with 3mm more offset so will put them on but it'll still contact I feel. Rims are a 17x9 27mm offset with 255/40/17 tyres.

If you use a bigger brake kit (I use the ATTKD front brakes) the mounting bracket won't fit. I had to cut out a section for the bracket to sit flush on the brake caliper mount. As per these>

20230312_113422.thumb.jpg.96a8de6ac246833db9747d91dacb57bb.jpg20230312_113425.thumb.jpg.3ba134f51fd8cce5578c025200fd0b16.jpg20230312_131010.thumb.jpg.bbdae6bb260dea04579382d6440dfaaf.jpg20230312_131023.thumb.jpg.01ab447551941b291d9455eebe29d2ff.jpg

Don't think it will matter as there' still tons of reinforcement but, not just bolt-on if you have bigger brakus.

 

For the Blitz coilovers - no doubt they're from the BC factory but they are different. The bottom mount is much shorter than BC's, and the info booklet notes a min ride height of -35, down to -80 or something. No provision to run stock ride height. The shock thread is also different so you can't put the BC bottom mounts on to them. They have different valving; in my opinion they're noticeably more comfy on the street than BC's. Top mount, springs etc all appear the same as BC's.

Mount length difference visible here>

20230312_105936.thumb.jpg.2769b322cd65bea4999c49193d5431df.jpg

Re the tie rods, here's the GK Tech extended rods vs Stock. I've used them for years, no issues at all, and they've beefed them up since the first set i used. Shown 'ere>

20230312_110024.thumb.jpg.2843818e4db671031fbee8f574f099e1.jpg

 

Hmm. I've pondered whether it was worth looking at these. I start this thinking at the rear, and it sort of drifts forwards to include the front for commonality purposes. Was aware of the 20mm drop and the consequent need for me to see if I have enough grooves on my Billy B6s to jack them up enough to compensate. Was not aware that there was a significant risk of them sticking out in odd places and fouling on the wheels, etc. Will influence my thinking.

Is that a plastic cap on the kingpin thread?

Yes a soft plastic cap on the kp thread, just for protection and remove once in place ready to bolt up. The install should be done by end of next week and will get a couple of photos up of them fitted. Then, test drive and see what's what.

Ran these on my track car for years. Good construction etc as you stated and few little quirks to getting everything to fit but are good and solid.

 

One things is I found they chewed tyres because of the ackerman when cornering, this experience is track only related

 

 

 

 

 

 

 

 

 

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1680, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...