Jump to content
SAU Community

Recommended Posts

6 minutes ago, GTSBoy said:

A local motor trimmer can usually redo a steering wheel at a reasonable cost. I say "reasonable", but nothing involving manual labour is really reasonable compared to buying a new Momo or similar.

Yeah thats i what i was thinking, prob still the best option, BYO cover and pay for install

1 hour ago, ChrisW434 said:

BYO cover and pay for install

I don't know where you would get a cover that you would prefer a trimmer to use over the cover that a trimmer would build from scratch from your choice of nice leather, or alcantara or whatever. Keep in mind that with the wheel you showed, you have to re-pad and cover the entire thing (except the hornpad/airbag part), not just the rim. The rim and the spokes are all the same thing. They all need to be under the same sewn expanse of fabric (or plasti-rubber, or whatever you do on top), with seamless padding from the edges of the spokes out onto the rim.

There are a number of crowds in Oz that speciailise in rebuilding steering wheels. They can redo them to factory spec, or you could go leather. Just do a google for "steering wheel restoration australia".

20 minutes ago, GTSBoy said:

I don't know where you would get a cover that you would prefer a trimmer to use over the cover that a trimmer would build from scratch from your choice of nice leather, or alcantara or whatever. Keep in mind that with the wheel you showed, you have to re-pad and cover the entire thing (except the hornpad/airbag part), not just the rim. The rim and the spokes are all the same thing. They all need to be under the same sewn expanse of fabric (or plasti-rubber, or whatever you do on top), with seamless padding from the edges of the spokes out onto the rim.

There are a number of crowds in Oz that speciailise in rebuilding steering wheels. They can redo them to factory spec, or you could go leather. Just do a google for "steering wheel restoration australia".

Well that actually sounds better. I'll chase that option up, happy to pay for a quality job. Thanks for the advice!

4 hours ago, ChrisW434 said:

Whoa, not so sure about that option 😄

So....you think you will get one covered for less than $600....that's lineball IMO.  Do your homework, but it is hard to find a business that does Skyline type wheels.  We fall into a black hole that nobody cares about/  There are restorers that work on older sold wheels for Chevies and EH Holdens etc, then there are those that work on R35/Porsche/BMW wheels.  I found it very hard to find anyone that works on our era cars...nobody seems interested.

Try a few upholstery businesses, but I'd doubt you will get it that much cheaper, as GTSBoy said, labour isn't cheap.  And a Momo in good condition will set you back over $1,000.  Remember you will need to keep your airbag setup.....and that raises the cost.

 

59 minutes ago, tridentt150v said:

So....you think you will get one covered for less than $600....that's lineball IMO.  Do your homework, but it is hard to find a business that does Skyline type wheels.  We fall into a black hole that nobody cares about/  There are restorers that work on older sold wheels for Chevies and EH Holdens etc, then there are those that work on R35/Porsche/BMW wheels.  I found it very hard to find anyone that works on our era cars...nobody seems interested.

Try a few upholstery businesses, but I'd doubt you will get it that much cheaper, as GTSBoy said, labour isn't cheap.  And a Momo in good condition will set you back over $1,000.  Remember you will need to keep your airbag setup.....and that raises the cost.

 

I'm not sure about what the work would cost locally yet, hence the question and request for info. I don't know if $600 is realistic here in Aust, just not keen to get the wheel sent to Singapore (or anywhere overseas for that matter).
 

Trying to see what others have done successfully. Seems like there's few different ways to go about it, but quality work isn't cheap, i do agree.

Maybe a company like the one below...?

36EEF2C6-8F4F-452C-87D5-0E30F71D2200.jpeg

Edited by ChrisW434

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...