Jump to content
SAU Community

Recommended Posts

Hello everyone. I have an R34 GT-R Spec V here in the States - one of the few legally-imported Midnight Purple 2 ones - and recently noted it was leaking some fluid. I took it to a local mechanic and they said they could see what appeared to be leaks in two places - the transfer case and another further forward. Unfortunately here in the States it's very hard to find any shops or mechanics well-versed in Skylines but especially the R34 since only a handful have been imported legally so I was hoping I could get some help here to track down what could be causing the leaks and what fix is needed. I'd also appreciate any input on whether this is a sign of some major issue or not. The leaks aren't bad - it's mainly just a very slow drip - but of course I don't want to ignore a potential issue.

The car has about 140K of mileage on it. AFAIK the engine was rebuilt in Japan about 30K ago but other than a switch to an ATS twin plate clutch and routine maintenance the driveline hasn't been messed with. The car's been running well and I haven't noticed any changes in driving behavior before or after discovering the leak.

Here are photos the mechanic took of the leaks. I'd like to mention that I myself have just fairly basic mechanical knowledge (I can do basic maintenance and have done simple mechanical work like installing bolt-on parts like exhausts and such but I leave major stuff to experts) so please forgive me if I seem clueless on certain things. Thanks in advance for any help.

IMG_1875.jpg

IMG_1876.jpg

IMG_1877.jpg

IMG_1880.jpg

IMG_1881.jpg

IMG_1886.jpg

IMG_1887.jpg

IMG_1888.jpg

OK, you are right, your mechanic doesn't know what they are looking at.

The best way to investigate an oil leak is to thoroughly degrease any apparent leak, drive for a day or 3, then put back up on the hoist and check again.

The first oil is almost certainly from when the oil filter was changed (unless the filter is relocated, you can check by looking under the front 1/3 of the plenum for the oil filter. From there you can see that whenever you change the filter, you will drop 300ml of oil on top of the front diff, which then runs down the front of the front diff (pic 1, 2, 7) and steering rack (6)

The other point that appears to be leaking is the ATTESSA/4wd actuator at the rear of the transfer case, the leak might be either the line that goes into the actuator or the flange where the actuator bolts to the transfer case. It is hard to tell because there is a bit of oil there. Step 1 I would back off the nut on the hose that goes into the actuator about 12 turn, then tighten it up again, this is a common leakage point over time.

  • Like 1
1 hour ago, GSX-R35 said:

Hello everyone. I have an R34 GT-R Spec V here in the States - one of the few legally-imported Midnight Purple 2 ones - and recently noted it was leaking some fluid. I took it to a local mechanic and they said they could see what appeared to be leaks in two places - the transfer case and another further forward. Unfortunately here in the States it's very hard to find any shops or mechanics well-versed in Skylines but especially the R34 since only a handful have been imported legally so I was hoping I could get some help here to track down what could be causing the leaks and what fix is needed. I'd also appreciate any input on whether this is a sign of some major issue or not. The leaks aren't bad - it's mainly just a very slow drip - but of course I don't want to ignore a potential issue.

The car has about 140K of mileage on it. AFAIK the engine was rebuilt in Japan about 30K ago but other than a switch to an ATS twin plate clutch and routine maintenance the driveline hasn't been messed with. The car's been running well and I haven't noticed any changes in driving behavior before or after discovering the leak.

Here are photos the mechanic took of the leaks. I'd like to mention that I myself have just fairly basic mechanical knowledge (I can do basic maintenance and have done simple mechanical work like installing bolt-on parts like exhausts and such but I leave major stuff to experts) so please forgive me if I seem clueless on certain things. Thanks in advance for any help.

The front diff/steering rack leak area could be a lot of things. Could be someone spilled the contents of the oil filter all over the front diff as others have said. The other possibility is the o-rings on the oil cooler are leaking. There's two o-rings, one on the oil cooler itself to the oil filter housing, another in the eye bolt that bolts the cooler to the oil filter housing. If you don't want a huge project disassembling the whole intake side of the engine you can reach from below behind the front diff using extensions and wobble joints to get the socket in the right place to undo it. Then you get to fight the hose clamps that feed coolant into that heat exchanger. Another possibility is a valve cover leak but that should be obvious from the top of the engine if you look carefully. Another possibility is that the front diff itself is leaking oil from somewhere like the front cover or axle seal. In my case it was all three and I didn't know until I fixed one problem only to discover despite cleaning off the front diff and everything else I was still getting oil at the bottom of my front diff.

I have started doing all my own work for these cars because I've realized that they aren't that complicated by modern standards (see: BMW N63, VR30DDTT, etc) and at the end of the day nobody is going to be as invested as you are in making sure the job is done correctly. Basically every time I have given the keys to a mechanic to let them do anything they have damaged something, usually discontinued and a huge pain to fix. Mechanics in my area are often used to being able to say that it could've been any previous mechanic that caused a problem but I am doing all my own work so often that I can pin down exactly who did something and it has turned into a huge fight every time I confront one about something I'm almost certain they did.

  • Like 1

Thanks for the helpful replies guys! I'll get back with the shop and see how it plays out. It would make sense that the oil at the front is from spilled oil - the car did have an oil change fairly recently and the filter is in the stock location. I'll bring up the suggestion on the hose for the transfer case and see how that works as well. Really appreciate the help and quick responses.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...