Jump to content
SAU Community

Recommended Posts

Buying some parts online from RHDJapan

The amounts total to over 1k

Would I be charged taxes when they come in? I can split my order into 2 sub 1k orders for same price if that avoids taxes 

Or does the DHL shipping cost account for taxes?

If anyone has bought from overseas pls

Umm that's probably just how tax works (you didn't mention value of what you are importing...), but GST and the broker's fee add up

I recently imported some expensive bits from US, value A$1,062.43 and paid import costs:

image.png

GST is 10% obviously, car parts from US were duty free (other than GST) and Other was the broker's %. Direct shipping cost was included in the cost base $1,062.43, not just the parts

Might be worth doing some more research on this. Looks to me like it might be worth splitting it if you can without getting shafted by shipping costs.

 

Quote

Importing goods internationally of a value less than $1000 AUD?

For goods with a value of AUD$1,000 or less that are imported, there is typically no requirement to pay import duties or taxes. However, this rule does not apply to alcohol or tobacco imports.

Importing goods internationally of a value over $1000 AUD?

For goods exceeding the value of AUD$1,000, it is necessary to submit an Import Declaration for your shipment. This process incurs a processing charge, and in addition, you will be obligated to pay duties and taxes.

From https://www.wwcf.com.au/customs-duty-import-goods-and-service-tax-calculator/.

 

FWIW, I ordered a clutch + slave cylinder from rhdjapan a while ago. Was AU$1,950.49 all up and I had to pay AU$404.36 on top of that in import duty. I'm not entirely sure how it arrived at that value because it was just a payment prompt from DHL. My guess in hindsight is that what DHL charged as import duty may have been 10% GST + import duty + import processing charges. It gets it somewhat close to this. Not sure ¯\_(ツ)_/¯

Import processing charges are listed in the link below. It also mentions the $1,000 as the cut off value.

https://www.abf.gov.au/importing-exporting-and-manufacturing/importing/cost-of-importing-goods/charges/import-processing-charge

19 minutes ago, Duncan said:

Umm that's probably just how tax works (you didn't mention value of what you are importing...), but GST and the broker's fee add up

I recently imported some expensive bits from US, value A$1,062.43 and paid import costs:

image.png

GST is 10% obviously, car parts from US were duty free (other than GST) and Other was the broker's %. Direct shipping cost was included in the cost base $1,062.43, not just the parts

Looking at buying these dixcel rotors in which total value is about 1300

I can divide the purchase into sending both separately and it will be same price 

If I can avoid charged that way 

Screenshot_20230516_184031_Chrome.jpg

6 minutes ago, soviet_merlin said:

Might be worth doing some more research on this. Looks to me like it might be worth splitting it if you can without getting shafted by shipping costs.

 

From https://www.wwcf.com.au/customs-duty-import-goods-and-service-tax-calculator/.

 

FWIW, I ordered a clutch + slave cylinder from rhdjapan a while ago. Was AU$1,950.49 all up and I had to pay AU$404.36 on top of that in import duty. I'm not entirely sure how it arrived at that value because it was just a payment prompt from DHL. My guess in hindsight is that what DHL charged as import duty may have been 10% GST + import duty + import processing charges. It gets it somewhat close to this. Not sure ¯\_(ツ)_/¯

Import processing charges are listed in the link below. It also mentions the $1,000 as the cut off value.

https://www.abf.gov.au/importing-exporting-and-manufacturing/importing/cost-of-importing-goods/charges/import-processing-charge

Thanks for the info did you get hit with 404 at time of order or once item arrived in AU? 

I'm buying dixcel rotors and the price of buying front and rear separate is the same cost as shipping gets doubled.

So might be worth buying separate as that'll be sub 1k and I can avoid costs (I hope)

6 minutes ago, YD34GTT said:

Thanks for the info did you get hit with 404 at time of order or once item arrived in AU? 

I'm buying dixcel rotors and the price of buying front and rear separate is the same cost as shipping gets doubled.

So might be worth buying separate as that'll be sub 1k and I can avoid costs (I hope)

From emails looks like it was next day after they shipped it in Japan. Prompted by DHL. As a counter point I also made a A$1,296.51 order from Nengun and I don't think I was charged anything extra.

So, really, I have no idea how the system works. Probably better to not go by my advice :)

  • Like 1
  • Haha 2
1 hour ago, YD34GTT said:

Buying some parts online from RHDJapan

The amounts total to over 1k

Would I be charged taxes when they come in? I can split my order into 2 sub 1k orders for same price if that avoids taxes 

Or does the DHL shipping cost account for taxes?

If anyone has bought from overseas pls

AFAIK this is how it works. Since the 2018 changes to GST on low value imports. Some companies will pre-emptively collect 10% GST from your order. if your package gets stopped at customs then they will pay for it. if it doesn't then your guess is good as mine.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...