Jump to content
SAU Community

Recommended Posts

Just a heads up, I'm in the USA.

 

I recently purchased a 1997 RS4V that I absolutely love. I've started to hunt for exhaust options as I'd like to hear that inline 6 sing a bit and I'm having a tough time finding options for my 1.5 but there seems to be a much better selection for the 2.0. Does anyone know what fitment differences the later cat backs have vs the earlier models? I can see the rear bumper cutout is smaller on mine but I can modify that.

Thanks in advance!

K

I don't know (mine is custom) but I would expect all C34 Stagea to be the same from catback. Potentially front and rear pipe different between S1 and S2 with different motor but all the rest of the chassis stayed the same

Get some Vibrant mufflers and custom make whatever to suit, the OTS stuff is never good IMHO, if you're keen import some SP Mufflers from Australia.

They are superb, they used be known as SMB Muffler however was taken over by SP Muffler (same design, tooling, etc. but modernised approach).

  • Like 1

Which one are you considering to get? My Stagea came with the Fujitsubo Legalis R. I think it sounds pretty good. OEM+. Quiet enough for residential but still has a nice burble to it on overrun. A little bit of drone on the highway maybe.

 

Looking to go custom when I have enough funds together. Things that bug me about it and that I'd like to improve as much as possible:

- It hangs pretty low. Often a bit of a butt-clencher on Australian driveways as it scrapes.

- Better flow. This one is okay at 260awkw but my tuner was saying it would definitely hold things back if looking for more.

- Drone on the highway is a bit annoying. Nothing like loud exhausts but I'm quite picky.

- Not a fan of the cannon look

On 12/13/2023 at 1:39 PM, LateApex72 said:

Just a heads up, I'm in the USA.

Hey LateApex72. I'm in the States too. I have a '98 260RS. What part of the States are you in? Like soviet_merlin, I have an OEM+ (HKS brand) that has nic burble, but drones a bit too much for me. I think I'm going to replace it. Depending on how quickly you're wanting to move on this, I may have a pipe for you.

 

@soviet_merlin

What are you looking at to combat the drone? Curious what the magic ingredient is in a custom exhaust to avoid it.

All** the Jap legal systems have a 2.5" restriction in them somewhere. This is on top of all the other reasons to not love them. A nice big centre-offset muffler in the middle and the biggest muffler that will fit in the rear is usually sufficient to keep even a 4" system civilised. Subject to Dose's stricture on the mufflers not being cheap shit retail part shop garbage, of course.

**May not be completely true, but is near enough to true to stand as stated.

  • Like 1

@Kip

Austin, TX

Thanks to our soviet_merlin above, I found a pic of the differences in the two Stagea series' exhaust systems. The piping looks different between the first and second mufflers. Looks like your 98 system will likely not work on my car. Still looking into what will work best (including custom).

16 hours ago, LateApex72 said:

Looks like your 98 system will likely not work on my car.

Bummer. Was hoping maybe we could both help each other out.

Good luck with your search. Let me/us know what you land on.

 

On 15/12/2023 at 10:16 AM, Kip said:

@soviet_merlin

What are you looking at to combat the drone? Curious what the magic ingredient is in a custom exhaust to avoid it.

Hah, not sure yet, I don't know much about exhausts. At this point I was going to talk to the same fabricator that built @Dose Pipe Sutututu's system for his Skyline. As the others were saying I presume some kind of muffler and resonator combination. I also doubt I'll get around to it any time soon. All money put aside for nice to have things on the car ends up being used for more important issues that pop up.

Would be curious to hear what people end up doing :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...