Jump to content
SAU Community

Rb25 splutter !

32pwwr

By 32pwwr,
in General Maintenance

 Share

Recommended Posts

32pwwr Explorer

32pwwr

Posted
Posted (edited)

Morning :)

little intro to the build r32 rb25 with a gtx3582 haltech platinum pro, 1000cc injectors 460 walbro fuel pump “maybe larger” with new lines and relay setup, new fuel lines an a FPR 1200. Made 350kw and Have had the car back now for a couple weeks haven’t had any real issue but this Sunday I got my first issue…. I generally fill up E85 at astron yagoona and with a quarter tank and on the way to a cars and coffee I stopped off at minto and put a full tank in it. 

after about 10 mins of driving and letting it all settle in the car started to misfire and splutter? nothing consistent but noticeable? on the way back spent about an hour on the free way at 110km/h cruising at about 3000rpm and this is where the car started to splutter intermittently and wouldn’t give me any boost if I dropped to 3rd gear would stop and let me have boost then start again when I would consistently cruise at 3000rpm this is where progressively the splutter would get more consistent. 
 

im about to check the fuel but the e85 at minto has always been consistent, I have aftermarket r35 coils and have pulled them apart and they look good to go and injectors sound to be doing there job? 

At idle I don’t have any issues when i let it idle for a while and gave it a few solid revs and nothing? When I got off the motor way and was driving city speeds/ traffic “50km/h” no splutter?
 

Could it be a:

fuel issue?

coil issue?

tune issue?

will go for another drive to see if it starts up again and see.

 

any helps appreciated!!!!

 

Edited by 32pwwr
Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/
Share on other sites
MBS206 Grand Master

MBS206

Posted
Posted
3 hours ago, Murray_Calavera said:

Can you go for a drive, log all the channels and post the data up?

That would be too easy for diagnosing. It's more fun to play throwing darts aimlessly...

 

I vote change the O2 sensor. Reason? None, just a random dart thrown.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/#findComment-7992133
Share on other sites
32pwwr Explorer

32pwwr

Posted
  • Author
Posted (edited)
16 hours ago, MBS206 said:

That would be too easy for diagnosing. It's more fun to play throwing darts aimlessly...

 

I vote change the O2 sensor. Reason? None, just a random dart thrown.

Love it haha, tuner came around and checked he said the timing was out and finds the Ross trigger kits to be a bit touch and go… back to his shop Thursday to fully diagnose but he thinks timing is the cause as we checked fuel pump, fuel filter, injectors, ignition and all came back good…. 
 

was very weird tho as only happened under sustained load cruising on the m7 at a sustained rpm and speed it would start sputtering felt like anti lag as when I put my foot down it would sputter or break up and not give me any boost then pull like a freight train when it gave me boost and was all at once

Edited by 32pwwr
Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/#findComment-7992144
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

I would be suss that that behaviour was caused by the trigger kit. The trigger kit doesn't really care what the engine load is. It's just seeing moving metal next to sensors. It may fail to work at a particular engine speed, but wouldn't care if it was low load, medium load or high load. And it probably shouldn't change moment to moment. It's either good or bad, unless it is temperature dependent.

The symptoms you describe are typically fuel or spark delivery related.

Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/#findComment-7992145
Share on other sites
32pwwr Explorer

32pwwr

Posted
  • Author
Posted
9 minutes ago, GTSBoy said:

I would be suss that that behaviour was caused by the trigger kit. The trigger kit doesn't really care what the engine load is. It's just seeing moving metal next to sensors. It may fail to work at a particular engine speed, but wouldn't care if it was low load, medium load or high load. And it probably shouldn't change moment to moment. It's either good or bad, unless it is temperature dependent.

The symptoms you describe are typically fuel or spark delivery related.

That’s what I was thinking, builds all under warranty so hopefully they figure it out quickly and I can post what the issue is

Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/#findComment-7992147
Share on other sites
32pwwr Explorer

32pwwr

Posted
  • Author
Posted (edited)
12 minutes ago, GTSBoy said:

I would be suss that that behaviour was caused by the trigger kit. The trigger kit doesn't really care what the engine load is. It's just seeing moving metal next to sensors. It may fail to work at a particular engine speed, but wouldn't care if it was low load, medium load or high load. And it probably shouldn't change moment to moment. It's either good or bad, unless it is temperature dependent.

The symptoms you describe are typically fuel or spark delivery related.

I also would like to note that the r35 coils packs are aftermarket… and did note to him I feel that they are possibly breaking up under sustained load and heat as when I got home and let it idle had no issues and when I got off the freeway and started driving city speeds had no issues, so going to purchase hitachis.

first time really driving it for so long aswell as I’ve only had it for 1-2 weeks. 

Edited by 32pwwr
Link to comment
https://www.sau.com.au/forums/topic/485732-rb25-splutter/#findComment-7992148
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      Yes they do. For some maybe. But for those used the most by abusers, ie Skylines, the numbers are known. The stock eyebrow height for R32/3 Skylines is about 365/375mm or thereabouts. The minimum such heights are recorded in adjacent columns in the database.
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Hmmm, interesting. Makes me wonder whether there is bias as well. It's the cheapest fuel, so it is used for all kinds of ill-maintained shitboxes which are bound to have issues regardless. Nicer cars tend to require higher octane rated fuel and can't use it anyway. FWIW, the official NSW E10 facts page is decent. 
×
×
  • Create New...