Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

200 3rd gear passenger in a r33 gtr at 6400rpm .. had to tell him to back down coz the speed wobbles on the rims was pretty hairy.

Was it an auto ?? he he - Cause 3rd gear in a manual won't be that fast.

I've redlined my line in 4th and taken it to about 6k in 5th down the main straight at EC - but f'd if I know what speed I was doing - cause I was looking at the good damned road ahead - and that f'ing nasty hight speed corner at turn 1.........

I did this on a Dyno so nothing illegal here, 261KPH on the RSM and 260KPH is what the dyno machine read. Hit rev limiter at 7200rpm. Was pretty impressed with the accuracy of the RSM actually. But then again is doesnt take into account wind resistance, tire friction and of course the good old VIC police.

ya, take into account the resistance of the air @ 260 and its a lot different.

For ALL you guys mentioning roads etc

Edit/remove your posts. SAU doesnt condone high-speed street activities

If you dont, i'll do it for you, and you may well cop a warning

Good to see lots of people are doing it on the track though. Much safer :D

My line - dunno. Had it up to 190ish (limiter) plenty of times, but haven't had it out at the track since PFC went in due to dying/dead coils, which I'm currently too pov to fix.

Bike - somewhere around 250-260 at Darlington Park, maybe could have gone a few km/h quicker but was already crapping myself about the blind right-hander at the end of the straight! I've seen 288 on it, at an airfield way out near where I was contracted at the time. Wanted 300 but not enough tarmac.

Warnings have been handed out.

again, i'll say...

SAU Does not condone illegal street behaviour.

Simply dont post up about it if you didnt do it on a track

if people cant follow that, thread will be closed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...