Jump to content
SAU Community

Recommended Posts

Cops were really good about it. Came around within an hour and are fingerprinting some time today.

The cops came round ??? Jeez that's good !

My place got robbed about a year ago - I had a suspect and everything - they wouldn't come around, told me to ring crime stoppers and that the station didn't hadle these type of burgleries - WTF ???

I got about $12K with of shit pinched. Lucky I had insurance and got it all back. But I still get the creeps that someone broke in and rumaged through my stuff.

6 months later - I get a sticker from the Police to stick on my window - warning off potential robber that all my stuff has been marked and identidied.

Nice one NSW police.

But good to hear that are helping you Adam....

Since we are bitchin about police i will add my 2c. About 18 months ago when i was living in a unit in Moore park 3 cars were stolen out of out "secure parking over 3 nights. All were high performance jap cars. The police didnt come any of the times, they only took incident reports over the phone. 2 nights later my alarm on my car went off, i went down to the garage only to see 3 guys running out the fire exit. I could even see their finger prints on the window off my car. Poilice still didnt come and none of the cars were ever recovered. Good work!

Maybe things have improved?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...