Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Ever heard the saying that a $2 part always caused the problem? :D

5000km is alot for a high strung engine, so you are better off spending the extra $5 for filters like ryco rather than have to spend $2000 on an engine rebuild after using cheap filters and oil

just because its more expensive doesn't mean its any better

you show me conclusive testing results saying that the filter twice the price is better and i will use it...

if you are going to re-oil your fitler then you might also want to get some carby cleaner (i use brake cleaner) to clean your AFM.

after you oil the filter some will travel through and onto the wire in the AFM so a few days after service it wouldn't hurt to give it a spray...

cheers,

Waz.

Do not forget to gap your sprak plugs

the bcpr6es is the model number and 11 is the gap you should gap them to 1.1 mm but on a turbo car you might go down to .8 depingding on boost..

They used to come pre gapped to 1.1 now you have to set the gap yourself

Would a 0.8mm gap on regular copper plugs in a stock engine be alright?

hey adam,

if you're running stock boost then i would stick with the 1.1mm gap for better combustion

from what i understand, 0.8mm gaps are for when the boost is turned up over stock levels

the way i see it if small gaps did nothing at all bad then all plugs would be gapped down to 0.5mm or so. the smaller the gap eventually must do something (i have heard that the larger the gap the better the fuel ignites and it combusts more efficiently or something).

moral of the story (in my opinion): run as big a gap as your engine will allow without missing :)

cheers,

Warren.

Thanks Waz just one more thing, can having the gap too small do any damage?

dunno

have heard that you can get pinging but have not had any first-hand experience so not 100% sure

i have a theory that if you gap it too small then you will begin to lose some power but as i said jsut atheory

INASNT - wow didn't realise the fuel filter was so cheap! wil get onto that myself!

cheers,

Waz.

If the gap is too small it will sound like marbles are rolling around in the engine (i.e a few cylinders wont fire). You will notice this as soon as the car is started.

If you have an exhaust the boost usually creeps up a few PSI so gapping to 0.9-0.8 could be an idea.

Ryco Fuel filters are around $20-25 from kmart for a Z200 - Z201/Z202 [bigger] I bought one about 12 months ago and will be replacing soon, I think the box said 15,000kms or 12 months [whichever comes first].

I dont know where you can get RYCO for $12 Denham?

Ryco Fuel filters are around $20-25 from kmart for a Z200 - Z201/Z202 [bigger] I bought one about 12 months ago and will be replacing soon, I think the box said 15,000kms or 12 months [whichever comes first].

 

I dont know where you can get RYCO for $12 Denham?

See attached photo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...