Jump to content
SAU Community

Recommended Posts

Yes I have one fitted to the 34.

It's good timing actually because Lumpy finished tuning it today.

We still have a problem of the emanage not comunicating with the ECU on the ignition side and are waiting for advice from Trust.

So it's basically only working as a "AFC" unit but is far superior to the Apexi. As a result we just recorded 302 rear wheel hp up from the previous best of 275 with the AFC.

Best news is it's making a heap more down low revs which is important.

Only running 0.85 bar as to run more need the 300zx AFM.

So there is obviously more to come for the next owner.

The problem I have should not be an issue with the 33 as the 34's computer is much more complex.

Hi Shaun

As it so happens I have 2 emanage units.

When I had the problem Trust sent me a second unit but that wasn't the problem.

I have to return it but I'll ask if I can sell it and just send the money which is easier.

They are closed for a week so can you wait?

Yeh no worries Chris on holiday next week so gimmie a call when ure ready.:D

BTW: what u askin for it? and do u have the cable and software im gonna need?

I need software right or am i nutz?

I have the basic unit only left over.

If you fit that it works as a AFC unit like the Apexi

If you buy the injector harness it works almost like a programmable unit for fuel (which is how I'm using it at present)

Then you can buy the ignition harness to control timing (which I have but doesn't work yet)

Unless you have access to a dyno and know what you're doing don't bother with buying the software as Lumpy has it and can install and tune it for you.

Originally posted by R34

Yes I have one fitted to the 34.

It's good timing actually because Lumpy finished tuning it today.

We still have a problem of the emanage not comunicating with the ECU on the ignition side and are waiting for advice from Trust.

So it's basically only working as a "AFC" unit but is far superior to the Apexi. As a result we just recorded 302 rear wheel hp up from the previous best of 275 with the AFC.

Best news is it's making a heap more down low revs which is important.

Heya Chris,

So are you saying that it made 25 more rwhp than the Apex SAFC? is it only about $500 between the 2?

Oh one more question, each time you get a mod done does that mean that you have to take it back to Lumpy to get it retuned and put on the dyno again? Does that have to happen with Apex Power FC aswell? What would you recommend between The PFC and the Emanage?

Originally posted by 25GTT

Heya Chris,

So are you saying that it made 25 more rwhp than the Apex SAFC? is it only about $500 between the 2?

Oh one more question, each time you get a mod done does that mean that you have to take it back to Lumpy to get it retuned and put on the dyno again? Does that have to happen with Apex Power FC aswell? What would you recommend between The PFC and the Emanage?

simple answer yes. with after market ecu u need to retune after engine related mods.

just doesn't take as long

$500 for the com as well as fit and tune right? not just the work?

Usually around 410 from nengun and lumpy should so it for 150 or so so yeh thats a good price. Put me down for it if u can

No the $500 is as I said for the fit and tune only.

The unit is extra.

The base unit maybe $410 from Nengun but can he get the injector and ignition harnesses as well?

Takes a while to wire them up as they are not as basic as the AFC where you only cut one wire.

There are about 20 odd wires to cut into.

Plus dyno time is about $150 per hour.

In basic form it would work like a S-AFC

There is so much more potential there it would be a shame not to use it.

Plus even in basic form you'd have to put it on the dyno then again once you buy the additional harnesses.

Talk to Lumpy he'd be the best to get advice on what to do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...