Jump to content
SAU Community

Recommended Posts

I have an intriguing question...

How have you guys mounted it to the front bar?? I have an R33 with M-spec bar (not that that matters) and i find the plate is too wide for the slot... at this stage i have just tried to pad in behind it, but its not going to well and the paint has been scraped from the pressure by the number plate.

I have noticed that my mums B4 has a similar situation, but she has some kind of bracket behind which makes the number sit further forward, hence not rubbing against the paint...

I hope you guys know what i'm talking about, just wondering if anyone has some suggestions for me.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/51016-people-with-slimline-plates/
Share on other sites

you can put brackets in or you can cut it... well i am pretty sure it may be not so legal but i have done it with mine the only thing that is missing is a little bit of the silver off the sides it fits perfect now you can hardly tell... well sorta but it looks better ;)

Before I got my mspec bar cut, my plate used to just bend a little in the middle. I screwed it into the normal place, but it didn't scrape or anything. Just slightly arched the middle of the plate.

It didn't permanently arch it either. Cause now I've got the front bar cut, it just sits flat along the top.

when i got my car it was already like this, but the plates are bent right at the edges so its the right distance across but its not actually cut so i think it should be ok legality-wise...

Got S2 front bar and car was sold to me from dealership with bent plates...

Might be a silly question, but does anyone know if there are laws against bent number plates?

In Qld it is Illegal to have bent plates, they call it defacing government issue items, or some shit like that........However i have only ever heard of ONE person being booked for it.

It may depend how nice you are to the officer that pulls you over.

I tend to use small brackets that screw into the underside of the top section of the bar and then are bent upwards, keeps the plate away from the bar. Works a treat. About 45cents each from bunnings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...